Advertisement
>
у е
Autolocate
Save/Load
RECORD
JUST:
Recording will begin the instant vou press ENTER
or the foot
switch (p.10 punch-in), and end at the instant you press EXIT or the
foot switch (punch-out).
MEAS:
Same as JUST except that recording begins and at the top of the
next measure.
AUTO:
Recording will begin and end at the punch in/out points you set
(p.10)
Tracks selected for record will blink red.
When you press RUN, or when a MIDI START or CONTINUE signal is
received, playback will begin, and the LCD will show
MEAS
AUTO
JUST
PUNCH
Waiting
Meas:001
Free:240K
SONG
:01
жжжжжжжж
Ъ=120
Time:04/04
When you press ENTER or press the foot switch, recording will begin,
and the LCD will show 'Punching'. Notes in the track that were still sound-
ing when punch-in recording began will be retained. Notes vou plav that
were alreadv depressed when punch-in recording began will be recorded as
if they had been played at the punch-in point. (If you punch-in during the
count-in, recording will begin from the top of the first measure, and all notes
you played during the count-in will be recorded at the top.)
When you punch-out, the LCD will return to 'PUNCH Waiting'. You
may continue punching in and out as many times as you wish. Notes in the
track that were still depressed at the punch-out point will be erased. Notes
you play that were still depressed when recording ended will be recorded,
but recorded as though they were released at the punch-out point.
If Autolocate is on, recording will end when location M3 is reached, and you
will return to location M2 and stop. If a MIDI START
or CONTINUE
message is received, recording will begin from the current measure whether
or not Autolocate is on.
As we mentioned earlier, your recording is in volatile memory, and you must
save it to disk if you wish to keep it. See p.9.
Advertisement
