Advertisement
7. Зефир Save
8. Setup Load
9. Song Clear
10. Track Erase
11. бупе Clock
RECORD/PLAV JOBS
Settings vou make for the QX3 can be saved in a Setup file. This file will
contain the following data.
PARAMETER
DATA
SYNC CLOCK
:
MEASURE
LOCATE | 3 теазиге numbers
CLICK
1:REC 2:REC/PLAY 3:ALWAYS 4:OFF
1:4 beats 2:8 beats 3:16 beats
RECEIVE CH.
MIDI channel for each track 1-16
RECEIVE
EVENT
Velocity, Control, Pitch Bend, Aftertouch,
Exclusive
REMOTE
IN
ON/OFF
REMOTE OUT
1:ВОТН 2:0UT 1 3:0UT 2 4:0FF
FUNCTION
KEY
Up to 128 keystrokes for each of 2 function keys.
FOOT SW
Location for punch in/out points.
ON/OFF
SONG SELECT
ON/OFF
CLOCK/BEAT
The number of clocks per beat the dial will move.
GATE TIME RATIO | Gate time percentage for each note value.
EVENT DISPLAY
On/off for each type of event.
CHAIN PAUSE
INTERVAL TIME
OUTPUT
PORT
tn MOR mode, MIDI OUT 1/2
Output channel and output port settings are saved and loaded along with
song data.
Using the dial, select a file number
1-99, enter a filename, and press
ENTER.
If there is already a file with that number, you will be asked
whether it can be written over.
A file of QX3 settings saved using the above job can be loaded. Use the dial
to select a file and press ENTER.
This job clears all song data in the QX3 memory as if the power had just
been turned on. Press ENTER and if you are sure, press "У".
This command erases all data in the tracks you specify. Press the track keys
to select the tracks to erase (the track indicator LED turns red) and press
ENTER.
If you are sure, press 'Y' (while holding the CHAR key) and the
tracks will be erased.
Measure marks and relative tempo data will be unaffected.
This determines the synchronization source for recording and playback.
The default setting is Internal.
1. Internal: The QX3 will synchronize to its own internal clock.
2. MIDI:
The QX3 will synchronize to MIDI CLOCK (F8h) signals from
another sequencer or rhythm machine connected to the MIDI IN ter-
minal of the QX3.
3. Tape: The QX3 will synchronize to the FSK timing signals from the
real panel TAPE IN jack. See Tape Svnc, p.28.
If MIDI or Tape clock is selected, Relative Tempo (p.18) will have no effect.
11
Advertisement
