Advertisement
ў ый
17. Remote
In
18. Remote
Out
19. Song Select
20. MIDI Monitor
21. Memorv
Status
22. Disk Status
RECORD/PLAV JOBS
This determines whether or not to receive the following MIDI System mes-
sages. The default setting is to receive System messages.
e Song Position Pointer (F2h)
e Start (FAh)
® Continue (FBh)
e Stop (FCh)
MIDI Song Select (F3h) reception is set by a separate job (p.13).
This determines how the following MIDI System messages are transmitted
from MIDI OUTs 1 and 2; from MIDI OUT 1, MIDI OUT 2, BOTH (1 and
2), or NEITHER. The default setting is BOTH.
e Song Position Pointer (F2h)
e Clock (F8h)
e Start (FAh)
e Continue (FBh)
e Stop (FCh)
When this is on, MIDI Continue (FBh) will be transmitted whenever you
continue from the middle of a song.
When this is On, MIDI Song Select messages (F3h) will be received and
transmitted.
When a Song Select message is received, the corresponding
song or song chain will be loaded into memory,
and you will go to the
top of the song.
When a song or song chain is loaded into memory, the
corresponding MIDI Song Position Pointer message will be transmitted.
The default setting is to ignore Song Select messages.
This job displays the MIDI messages that are received at MIDI IN. Incoming
data will be displayed regardless of the Receive Event setting (p.12). The
following messages will be displayed.
e Note On
e Pitch Bend
Control Change
Program Change
e Aftertouch
e Exclusive
This command lets you see how much memory is available. The QX3 has 240
kilobytes of recording memory. Press EXIT to leave the job.
Insert a disk before selecting this job. The LCD shows the used and free
space on the disk, and the total number of files (0-112).
13
Advertisement
