Advertisement
12
RECORD/PLAV JOBS
12.
13.
14.
15.
16.
Echo Back
Output Ch
Output Port
Receive Ch
Receive Event
This determines the MIDI channel that each track will receive when record-
ing. Tracks can be set to receive the same channel. The default is all tracks
set to omni (receive all channels).
The QX3 can be set to receive (1) or ignore (0) the following types of MIDI
data. The default setting is to receive everything except Aftertouch.
VEL (Velocity): When Velocity is off, all incoming notes will be given a
velocity of 64.
CTR
(Control): This
only
affects
the
'continuous
controllers'
1-63.
Regardless of this setting, control changes 64-120 and 122-127 will always
be received, and control change 121 (all note off) will never be received.
P.B. (Pitch Bend): Received or ignored.
PRG (Program Change): Received or ignored.
A.T. (Aftertouch): Received or ignored.
EXL
(Exclusive): This refers to System Exclusive messages such as
parameter changes, recorded as part of a sequence. A single message must
not exceed
1024 bytes. The QX3 itself does not process the Exclusive
message in any way. If the message contains a device number or channel
number, it will be played back just as it was received.
Advertisement
