Advertisement
10
RECORD/PLAV JOBS
RECORD/PLAY JOBS
1. Click
2. Click Beat
3. Count
In
4. Measure
Locate
5. Auto Punch Point
6. Foot Switch
Use the numeric key pad to select the click beat; quarter note, eighth note
or sixteenth note.
When sync (p.11) is Internal, you have the option of a two measure count
in before recording from the top. The default setting is On.
This job sets the three measure locate memories. Move the cursor, use the
numeric key pad to enter the measure numbers, and press ENTER.
In PLAY or RECORD
mode, press the M1 key to jump to the МІ
location. M2 and M3 determine the auto-locate points (p.7).
These measure locate memories can also be set while in PLAY mode.
Press M1, M2 or M3 while presssing the SHIFT key. The memory will be
set to the current measure. (The advantage of using this job is that you can
see what the three current settings are.)
Here you can set the punch in/out points used in Auto Punch-in recording
(p.6). Enter the measure numbers and the sixteenth notes for both punch
points.
This sets the function of the footswitch? connected to the rear panel jack.
You have the following options.
1. PUNCH IN/OUT: See Punch-in Record, p.6.
3 Sold separately. Use a footswitch such as the Yamaha FC-4 or FC-5.
Advertisement
