Table of Contents
Advertisement
23 Exhaust temp
24 Outdoor coil temp
25 Outdoor environment temp
26 Buffer tank temp
27 Temp of after throttling
28 Inlet water temp
29 Outlet water temp
30 Air return temp
31 Multiple units working
32 Status of multiple units working
33 Status of water pump
Factory parameter inquiry and setting (can set when unit is on or off)
1. In main menu, press
press
button to enter factory parameter setting menu, and press
button to set factory parameters, then press
status.
2. In factory parameters inquiry or setting menu, if there is no operation for 30 seconds, will
automatically exit factory parameter inquiry or setting menu and back to main menu. Or
press
button to back to main menu.
Table 2
Item
Description
00
DHW mode temp difference 1-15
Working mode of water
01
pump
Running
time
02
pump
button for 3 seconds to enter factory parameter inquiry menu,
Range
0-2
of
water
1-30 Min
-30 140
-30 105
-30 105
-30 105
-30 105
-30 105
-30 105
-30 105
0:NO
0:OFF 1:ON
0:OFF 1:ON
button to save and back to inquiry
Default
Remark
Value
5
0- On/off as compressor on/off, when
compressor is off, run for 1min
every parameter 2 setting.
2
1- On/off as compressor on/off, when
compressor is off, run 30s more
On/off as the unit on/off
2-
5 Min
-
-
1:YES
or
Advertisement
Table of Contents
