Simplicity 7100 Series Operator's Manual page 41

WARNING
For your personal safety, stop tractor
engine, remove key, shift into neutral,
set parking brake, and disengage Power-
Take-Off (PTO) before installing the
mower on your tractor or performing
any adjustments.
1. Slide the mower under the tractor.
2. Turn the front wheels to face straight
ahead.
3. Using the tractor lift lever or optional
electric or hydraulic lift, lower the trac¬
tor lift cable.
4. Use the lift cable pin and spring clip to
attach the tractor lift cable clevis to the
mower lift anchor (E, figure 37).
NOTE
The front idler pulley (L, figure 37)
must be in the top mounting hole for
mower installation.
5. Raise the mower using the tractor lift
lever or electric lift.
Adjustments
A. PTO Clutch Lever F.
B. Tractor Drive Pulley G.
C. Belt Tensioning Lever H.
D. Drive Belt I.
E. Lift Anchor J.
Figure 37. Mower Installation
Lift Cable Clevis
Deflector
Mower Driven Pulley
Rocker Arm
Tractor Front Hitch
K. Lift Lover
L. Front Idler Pulley
M. Rear Idler Pulley
39