Philips CED780 Quick Start Manual page 2

What's in the box
Main unit and front panel Remote control Trim plate
(with a sleeve)
ISO standard Audio and Video
connector cable
A
Connect wires
Connector Connect to
1 Yellow wire The +12V car battery which is live at all times.
2 Blue/White wire The electric antenna control lead or power supply lead
of the antenna booster. If there is no electric antenna or
antenna booster, or it is manually operated telescopic
antenna, it is unnecessary to connect this lead.
3 Black wire A metal surface of the car. Connect the black ground
(earth) lead before connect the yellow and red power
supply leads.
4 Red wire The +12V power terminal which is live in the accessory
(ACC) position of the ignition switch. If there is no
accessory position, connect to the +12V car battery
terminal that is always live. Ensure that black ground
(earth) lead is connected to a metal surface of the car
ÀUVW
5 Green and green/black wires Left speaker (Rear)
6 White and white/black wires Left speaker (Front)
7 Gray and gray/black wires Right speaker (Front)
8 Purple and purple/black wires Right speaker (Rear)
B
Connect wires
Connector/Object Connect to/with
1 Pink wire Extension wire
2 Extension wire (not included) Parking brake (-)
3 Brake switch
4 Ground
5 Purple wire Reverse camera (B+)
6 Gearbox switch
7 Reverse gear signal Black lamp lead +
8 ISO wires Connected in step 1 above
9 Yellow cable Video out
10 Red cable Rear line out (Right)
11 White cable Rear line out (Left)
12 Red cable Front line out (Right)
13 White cable Front line out (Left)
14 Red cable Audio in (Right)
15 White cable Audio in (Left)
16 Yellow cable Video in
17 Brown cable Camera in
18 Blue cable Subwoofer
19 White wire OE remote
20 Black wire Radio antenna
21 Black wire External microphone
22 Black wire GPS smart antenna
Á Quick start guide
Carrying case for Hexagon head
Screws
front panel screwpanel
M4x8mm (x4)
Rubber Remote control
Quick start
User manual
cushion battery
guide
Turn on
1
Press to turn the unit on.
» The available OSD (On-Screen Display) languages are displayed.
2
7DS D ODQJXDJH ZLWK ÀQJHUWLS
» The OSD language is changed to the selected language immediately.
3
7DS D UDGLR UHJLRQ ZLWK ÀQJHUWLS
» The radio region is changed to the selected radio region immediately.
4
Tap [Finish] WR FRQÀUP
Pair the Bluetooth-enabled devices
Pairing with unit
1
Tap to display home menu.
2
Tap .
» The setting menu is displayed.
3
Tap to display Bluetooth setting menu.
4
Tap [New Pairing] to search for Bluetooth device with your device.
5
Select the name of desired device in the pairing list.
6
Enter default password "0000" in your device.
» iI the pairing succeeds. the phone call record is displayed.
Pairing with mobile phone
1
Open your mobile phone and switch on Bluetooth.
2
Search for other Bluetooth device with your device.
3
Select "CED780" in the pairing list.
4
Enter default password "0000".
» If the pairing succeeds, the dial screen is displayed.
Make a call
1
Tap on top of the screen.
» The dial screen is displayed.
2
Tap number icons directly to input phone number.
‡ Tap to clear the last input.
‡ Tap to clear all input.
‡ Tap to go back to previous screen.
3
Tap to start calling.
4
During talking, tap to display the keypad.
Receive call
1
If there is an incoming call, [Incoming call...] is displayed on the screen.
2
Tap (green) to answer/accept the call.
3
When conversation ends, tap (red) to terminate the call.
Reset
When the unit hangs up, you can reset it.
Press RESET with a ball-point pen or similar tool.