Registration - Philips CD6551B User Manual

Note
The default PIN code is preset to 0000. If
you change this PIN code, keep the PIN
details in a safe place where you have easy
access to them. Do not lose the PIN code.
M
1
Press
to
ADVANC. SETTINGS
m
SELECT
and press
PIN
2
Enter the current master PIN when
prompted and press
confirm.
• The PIN entered will be shown as
asterisks (*) on the screen.
3
Enter the new PIN and press
4
Enter the new PIN again and press
m
to confirm PIN change.
OK
• A validation tone is emitted and the
screen returns to previous menu.
Note
If you forget your PIN, you will need to
reset your phone to its default settings.
See next section "Reset Unit" for more
details.
8.6

Registration

If you wish to register an additional
handset or if you have inadvertently
unregistered your phone handset and
want to re-register it, follow the
procedure described below. This is the
procedure for registering CD650/655
handsets.The procedures may vary
according to the handset you want to
register. In this case, please refer to the
manufacturer of the additional handset.
Additional handsets must be registered to
the base unit before you can use them. Up
34
in idle mode, scroll
and press
:
, scroll to
CHANGE
m
.
SELECT
m
to
OK
m
to 5 handsets can be registered to one
base station.
The master PIN is required before you
can register or unregister handsets.
Note
:
By default, the master PIN is 0000.
To register your handset manually:
The Master PIN is required before you
can register or unregister handsets.
Note
By default, the Master PIN is 0000.
1
On the base station, press and hold
p
The base station emits a beep when
.
OK
it is ready to accept registration.
2
On the handset, press
scroll
and press
REGISTRATION
m
SELECT
Note
If no action is taken on the handset within
10 seconds, the registration procedure
will be aborted. If this happens, repeat
Step 1.
3
Enter the Master PIN when prompted
and press
Note
By default, the Master PIN is 0000.
4
WAITING_ _
screen.
Note
If no base is found within a certain period,
the handset returns to idle mode.
for approximately 5 seconds.
:
to
ADVANC. SETTINGS
m
SELECT
and press
.
m
to confirm.
OK
is displayed on the
Advanced settings
M
key,
:
, scroll to