Change Pin; Registration - Philips SE6582B/37 User Manual

Press m in idle mode, scroll n to
Advanced Set and press o
Select.
Scroll n to XHD Sound and
press o Select.
Scroll n to select On or Off and
press o Select to confirm.
• A validation tone is emitted and
the screen returns to the
Advanced Set menu.
13.5

Change PIN

The PIN is used for setting call barring
numbers and registration/unregistration
of handsets. The default PIN number is
0000. This PIN is also used to protect
the settings of your handset. Your
handset will prompt you whenever the
PIN is required.
Note
The default PIN code is preset to 0000. If
you change this PIN code, keep the PIN
details in a safe place where you have
easy access to them. Do not lose the PIN
code.
Press m in idle mode, scroll n to
Advanced Set and press o
Select.
Scroll n to Change PIN and
press o Select.
Old PIN: will be displayed. Enter
the current PIN and press o OK.
• The PIN entered will be shown
as asterisks (*) on the screen.
• If you enter an incorrect PIN
number, an error tone will sound
and "Wrong PIN!" will be
displayed. Then, you will be
52
prompted to enter the current
PIN again.
New PIN: will be displayed. Enter
the new PIN and press o OK.
Confirm PIN: will be displayed.
Enter the new PIN again and press
o OK to confirm PIN change.
• A validation tone is emitted,
Saved! is displayed and the
screen returns to the Advanced
Set menu.
Tip
If you forget your PIN, you will need to
reset your phone to its default settings.
For more details, see section 13.8 -
"Reset Unit."
13.6

Registration

If you wish to register an additional
handset or if you have inadvertently
unregistered your phone's handset and
want to re-register it, follow the
procedure described below. This is the
procedure for registering SE65 handsets.
Procedures may vary for other types of
handsets. In this case, please refer to the
manufacturer of the handset. Additional
handsets must be registered to the base
station before you can use them. Up to 8
handsets can be registered to one base
station.The PIN is required before you
can register or unregister handsets.
Note
By default, the PIN is 0000.
Advanced settings