Baby Call; Registration - Philips SE 745 Owner's Manual

8.4.2 To modify Call Barring number
m
1
Press
MENU
and press
Advanced Set
:
to
Call Barring
2
Enter the Master PIN when prompted and
m
press OK to confirm.
Note
By default, the Master PIN is 0000.
:
3
Scroll to
Barring Nr.
m
SELECT.
:
4
Scroll to
Number 1
or and press
Number 4
5
Enter the barring number (maximum 4 digits)
m
and press OK to confirm.
• A validation tone is emitted and the screen
returns to previous menu.
Note
If a restricted number is dialled, the call will not
be connected. When this happens, the phone
emits an error tone and returns to idle mode.

8.5 Baby Call

When activated, the Baby Call feature enables
you to dial a number by pressing any key on your
handset. This feature is very useful for direct
access to emergency services.
You can enter up to 24 digits for baby call
number.
8.5.1 To activate Baby Call mode
m
1
Press MENU in idle mode, scroll
and press
Advanced Set
:
to
Baby call
2
Enter the Master PIN when prompted and
m
press OK to confirm.
Note
By default, the Master PIN is 0000.
m
3
Press SELECT to enter
:
4
Scroll to
On
confirm.
5
Enter the Baby Call number and press
m
OK to confirm.
• A validation tone is emitted.
Advanced settings
in idle mode, scroll
m
SELECT, scroll
m
and press SELECT.
and press
, ,
Number 2 Number 3
m
SELECT.
m
SELECT, scroll
m
and press SELECT.
.
Mode
m
and press SELECT to
8.5.2 To deactivate Baby Call mode
:
1
Long press
to
mode has been activated before).
2
Enter the Master PIN when prompted and
press
Note
By default, the Master PIN is 0000.
3
Scroll
confirm.
8.5.3 To change Baby Call number
1
Press
Advanced Set
:
to
2
Enter the Master PIN when prompted and
press
Note
By default, the Master PIN is 0000.
3
Scroll
m
SELECT.
• The last stored Baby Call number is displayed
(if any).
4
Enter the baby call number (maximum 24
digits) and press
• A validation tone is emitted and the screen
returns to previous menu.

8.6 Registration

The procedures described below are the
procedures that you will find in your handset. The
:
procedures may vary according to the handset
to
you want to register. In this case, please refer to
the manufacturer of the additional handset.
Additional handsets must be registered to the
base unit before you can use them. Up to 6
handsets can be registered to one base station.
The Master PIN is required before you can
register or unregister handsets.
Note
By default, the Master PIN is 0000.
1
On the base station, press and hold
approximately 3 seconds.
• A validation tone is emitted.
2
On the handset, press
to
Advanced Set
m
MENU (when Baby Call
m
OK to confirm.
:
to and press
Off
m
MENU in idle mode, scroll
m
and press
and press
Baby call
m
OK to confirm.
:
to and press
Number
m
OK to confirm.
m
and press
m
SELECT to
:
to
SELECT, scroll
m
SELECT.
C
for
:
MENU, scroll
m
SELECT,
31