GemOne Sapphire V2SC Procedures Manual
Hide thumbs
Also See for Sapphire V2SC:
- Hardware installation (33 pages) ,
- Procedures manual (26 pages) ,
- Hardware operation manual (13 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for GemOne Sapphire V2SC
Summary of Contents for GemOne Sapphire V2SC
- Page 1 Sapphire V2SC Wi-Fi Setup Procedure Manual Version 1.1 - March 2024...
-
Page 2: Table Of Contents
Content 1- Introduction - Purpose - General Information - Hardware Information - Portal Access 2 - Wi-Fi Information - Communication from Device to Portal - Firewall Information - Wi-Fi Information - MAC Address 3 -Setting up Wi-Fi - Turning On the Equipment - Exit Code - Configuring Wi-Fi - Connection Test... -
Page 3: 1- Introduction
The purpose of this document is to cover how the GemOne servers are set up and how to set up Wi-Fi on Sapphire V2SC modules. It will also cover the security aspect and how GemOne details can be whitelisted. This will allow devices to send data to the GemOne server using Wi-Fi. -
Page 4: Wi-Fi Information
WPA / WPA2, WEP 64-bit, and 128-bit encryption 2.4GHz & 5GHz MAC Address The MAC address can be found locally on the device. See page 8 for steps on how to check the MAC address. Contact GemOne if additional information is required. Sapphire V2SC Wi-Fi Setup... -
Page 5: Setting Up Wi-Fi
7278896 under Driver followed 3. If the screen appears to be blank, by ENTER. press the red power button on the top left twice and then the Android home screen will appear. Sapphire V2SC Wi-Fi Setup... -
Page 6: Configuring Wi-Fi
6. Enter the password now appear. Select the network that and then press submit. the Sapphire module will connect to. 7. Once connected, it will say connected and there will be a Wi-Fi symbol on the top right corner. Sapphire V2SC Wi-Fi Setup... -
Page 7: Connection Test
A count down should start, let it count until it stops. It will deny you within 60 seconds if the Wi-Fi connection is valid. If the modules needs to remain connected to the cellular plan, please disconnect your Wi-Fi Sapphire V2SC Wi-Fi Setup... -
Page 8: Mac Address
4. Drag the screen from the bottom 5. Select settings. towards to top to bring up the menu. 6. Scroll to the bottom and then go to 7. Scroll down and then the Wi-FI MAC About Tablet. adress will be populated. Sapphire V2SC Wi-Fi Setup... -
Page 9: Support
+32 56 93 01 08 +1 (844) 656-1156 support_emea@gemone.com techservice@gemone.com EMEA Spinnerijstraat 99/23 US 16355 South Elm Rd 8500 Kortrijk Olathe, Kansas 66062 Belgium ASEA +61 1300 848 415 support_apac@gemone.com 735 Boundary Road Richlands, QLD 4077 Australia Sapphire V2SC Wi-Fi Setup... - Page 10 US: techservice@gemone.com EMEA: support_emea@gemone.com ASEA: support_apac@gemone.com www.gemone.com ©2024 - GemOne NV, Spinnerijstraat 99/23, BE- 8500 KORTRIJK. All rights reserved. No part of this publication may be reproduced or communicated in any form or by any means, electronic or mechanical, including copying, recording or use in an information storage or retrieval system, without prior and explicit permission of GemOne NV.
Need help?
Do you have a question about the Sapphire V2SC and is the answer not in the manual?
Questions and answers