Configure Your Phone (Country Dependent); Charge The Handset - Philips CD2950B User Manual

Note
•
Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
being charged, it is normal.
Warning
•
Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
Configure your phone
(country dependent)
1
When using your phone for the first time,
you see a welcome message.
2
Press [OK].
Set the language
Select your language, then press [OK] to
confirm.
» The language setting is saved.
To re-set the language, see the following steps.
1
Select [Menu] > [Phone setup] >
[Language], then press [OK] to confirm.
2
Select a language, then press [OK] to
confirm.
» The setting is saved.
Set the date and time
Tip
•
To set the date and time later, press [Back] to skip this
setting.
1
Select [Menu] > [Phone setup] > [Date &
time], then press [OK] to confirm.
2
Press the numeric buttons to enter the
date, then press [OK] to confirm.
3
Press the numeric buttons to enter the
time.
Note
•
If the time is in 12-hour format, press
[AM] or [PM].
4
Press [OK] to confirm.

Charge the handset

Place the handset on the charger to charge the
handset. When the handset is placed correctly
on the charger, you hear a docking sound.
» The handset starts charging.
Note
•
Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
being charged, it is normal.
You can activate or deactivate the docking tone
(see 'Set the docking tone' on page 14).
Your phone is now ready to use.
/ to select
EN 7