Select The Recall Duration; Dial Mode; Register The Handsets - Philips CD2950B User Manual

Set auto prefix
1
Select [Menu] > [Services] > [Auto
prefix], then press [OK] to confirm.
2
Enter the detect number, then press [OK]
to confirm.
3
Enter the prefix number, then press [OK]
to confirm.
» The setting is saved.
Note
•
To enter a pause, press and hold
Note
•
If the prefix number is set and the detect number is left
empty, the prefix number is added to all outgoing calls.
Note
•
The feature is unavailable if the dialed number starts
with * and #.

Select the recall duration

Ensure that the recall time is set correctly before
you can answer a second call. In normal case, the
phone is already preset for the recall duration.
You can select among 3 options: [Short],
[Medium] and [Long]. The number of available
options varies with different countries. For
details, consult your service provider.
1
Select [Menu] >[Services] > [Recall time],
then press [OK] to confirm.
2
Select an option, then press [OK] to
confirm.
» The setting is saved.
18 EN
.

Dial mode

Note
•
This feature only applies to models that support both
tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
Set the dial mode
1
Select [Menu] > [Services] > [Dial mode],
then press [OK] to confirm.
2
Select a dial mode, then press [OK] to
confirm.
» The setting is saved.
Note
•
If your phone is in pulse dial mode, press
call for temporary tone mode. Digits entered for this
call are then sent out as tone signals.

Register the handsets

You can register additional handsets to the base
station. The base station can register up to 5
handsets.
Auto registration
Place the unregistered handset on the base
station.
» The handset detects the base station
and start to register automatically.
» Registration is completed in less than 2
minutes. The base station automatically
assigns a handset number to the
handset.
during a