Unregister The Handsets; Restore Default Settings - Philips CD2950B User Manual

Manual registration
If auto registration fails, register your handset
manually to the base station.
1
Select [Menu] > [Services] > [Register],
then press [OK] to confirm.
2
Enter the system PIN. Press [Clear] to
make corrections. Press [OK] to confirm
the PIN.
3
Press and hold
seconds.
Note
•
For models with an answering machine, you hear a
confirmation beep.
4
Press [OK] to start the registration.
» Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•
If the PIN is incorrect or no base is found within a
certain period, your handset displays a notification
message. Repeat the above procedure if registration
fails.
Note
•
The preset PIN is 0000. No change can be made on it.
on the base station for 5

Unregister the handsets

1
If two handsets share the same base station,
you can unregister a handset with another
handset.
2
Select [Menu] > [Services] > [Unregister],
then press [OK] to confirm.
3
Enter the system PIN. Press [Clear] to
make corrections. Press [OK] to confirm
the PIN.
4
Select the handset number to be
unregistered.
5
Press [OK] to confirm.
» The handset is unregistered.
Tip
•
The handset number displays beside the handset name
in standby mode.

Restore default settings

You can reset your phone settings to the original
factory settings.
1
Select [Menu] > [Services] > [Reset], then
press [OK] to confirm.
» The handset displays a confirmation
request.
2
Press [OK] to confirm.
» All settings are reset.
EN 19