Access BI SUMMERTOP Assembly Instructions Manual page 17

INSTALLING THE STRAP PADEYES
STEP 6
9
1. Assemble the straps on the canvas (pictures 1 to 5)
according to the model, from 2 to 4 straps.
2. Using a pencil, mark the location of the screws for
each pad-eye (part 10 in the kit).
3. Drill each mark using a ø 3 bit.
4. Mill the holes.
5. Put silicon in the holes for sealing.
6. Screw the pad-eyes to the boat using 3.5 x 16
screws (part 8 in the kit).
1
4
2
5
BI SUMMERTOP ALU WITH SELVEDGE only on Open Hull
17
3
6
Assembly instructions – March 2024
ACCESS by NV