Access BI SUMMERTOP Assembly Instructions Manual page 14

5
1. Once the feet are positioned
on either side of the canvas,
simply click the shortest part
of each foot onto the central
crossbar, and then snap the
other tubes onto the
remaining crossbars.
2. Make sure that all the feet are
properly locked in place.
STEP 3
6
1. Attach the rear
support collars to
the two longer
2. Adjust the
position of the
rear support
collars correctly.
FIXING THE SUPPORTS ON THE BOAT
feet.
Assembly instructions – March 2024
BI SUMMERTOP ALU WITH SELVEDGE only on Open Hull
14
ACCESS by NV