Page 1
Measuring tape and pencil FIRST COMPOSITION CROSSBARS x3) FEET x2 CANVAS x2 STORAGE COVER x1 STRAPS x4 REAR SUPPORTS x2 ATTACHMENT KIT AND MANUAL WITH : CLEVIS x4 RIBPORT x4 Assembly instructions – March 2023 ACCESS BIMINI SUMMERTOP ALU WITH SELVEDGE...
Page 2
Red sticker - Right Green sticker - Left The easiest way to start is to pass the canvases through the central crossbar, then slide them into the inner parts of the selvedges. Assembly instructions – March 2023 ACCESS BIMINI SUMMERTOP ALU WITH SELVEDGE...
Page 3
Do the same for the feet with the red washer. Front of the product Rear of the product Assembly instructions – March 2023 ACCESS BIMINI SUMMERTOP ALU WITH SELVEDGE...
Page 4
2. Make sure that all the feet are properly locked in place. FIXING THE SUPPORTS ON THE BOAT STEP 3 Attach the rear support collars to the two longer feet. Assembly instructions – March 2023 ACCESS BIMINI SUMMERTOP ALU WITH SELVEDGE...
Page 5
2. Tighten the straps slightly. 3. Position it on the area of the boat to be protected. Be careful not to place the Bimini too far forward or too far back (see diagrams opposite). 4. Once correctly positioned, mark the...
Page 6
STORING THE BIMINI IN ITS COVER 1. Fold the Bimini back 2. Roll up the canvas using the straps 3. Position the cover on the canvas 4. Close the cover Assembly instructions – March 2023 ACCESS BIMINI SUMMERTOP ALU WITH SELVEDGE...
Page 7
(to a line, or a handrail, etc.) 4. Tighten the strap using the adjustment loops. YOUR BIMINI SUMMERTOP IS READY. ENJOY SAILING! Find the whole ACCESS range on www.nvequipment.com Assembly instructions – March 2023 ACCESS BIMINI SUMMERTOP ALU WITH SELVEDGE...