Table of Contents
Advertisement
EMPTYING AND REPLACING THE DUST BAG
When the dust bag is full or when the suction power is reduced, it
is time to empty the dust bag.
• Switch off the vacuum cleaner and unplug the appliance at the
socket.
• Release the locking block to open up the housing, taking the
lid off of the main body as shown in the diagram below.
• Remove the dust bag from the suction port. Position the dust
bag over a bin and empty out the dust bag, as seen below.
RHTV2001
Suction port
Revision 1.4
Advertisement
Table of Contents
