Download Print this page

Inglesina BASE DARWIN BELTED CAR BASE Instruction Manual page 16

Advertisement

INSTRUCTIONS
LIST OF COMPONENTS
BASE DARWIN BELTED
fig. 1
A
Lateral belt guiding elements
IMPORTANT
• Verify that on the vehicle seat there are not any items that may hinder the correct
leaning of the Base to the vehicle seat.
• Verify that the backrest is in vertical position and the vehicle seat where the car base
has to be installed is NOT EQUIPPED WITH FRONT AIRBAG.
• Install the Inglesina car system only IN THE OPPOSITE DIRECTION TO THE
DRIVING ONE.
POSITIONING AND INSTALLATION OF THE INGLESINA DARWIN BELTED CAR
SYSTEM
fig. 2
After having positioned the base on the vehicle seat, pass the lower
segment (S1) of the car safety belt through the lateral belt guiding elements (A); then,
hook the car safety belt properly.
fig. 3
Install the Darwin Infant child car seat to the Base Darwin Belted only IN
THE OPPOSITE DIRECTION TO THE DRIVING ONE, until hearing both CLICK sounds
indicating the occurred hooking.
CAUTION: make sure that the child car seat is properly hooked on both sides,
trying to lift it.
fig. 4
Rotate the child car seat handle (B) to the most forward position. Make sure
that the two buttons (D) completely come out, after having arranged the handle to
the proper position.
fig. 5
Pass the diagonal segment (S2) of the car safety belt through the rear
guides (G).
CAUTION: make sure that the safety belts are well stretched and not twisted.
Only in this way it is possible to obtain the perfect anchoring of the Inglesina
Darwin Belted car system.
REMOVAL OF THE INGLESINA DARWIN BELTED CAR SYSTEM
fig. 6
By pressing the two buttons (D) simultaneously, rotate the child car seat
handle to the vertical position and, after having removed the safety belt diagonal
segment from the rear guides (E), acting on the lever (I), lift it from the Base Darwin
Belted by holding it from the handle. The base remains on board, ready for use.
fig. 7
To remove the Base Darwin Belted from the vehicle seat, it is sufficient to
completely unhook the safety belt freeing the lateral belt guiding elements (A).
16

Advertisement

loading