Advertisement
• Before assembling, verify that the product and all its components have not been
subject to damages during transport. Should this be the case, do not use the product
and keep it out of reach of children.
• Before using the product, for the safety of your child, remove and eliminate all
plastic bags and elements belonging to the packaging and, in any case, keep the same
out of reach of newborns and children.
• Do not use the car system in positions or configurations other than those illustrated
in this user manual.
• Do not install it in rearward-facing vehicle seats or in vehicle seats that are
transversal with respect to the direction of travel.
• HAZARD! Do not use Darwin Infant Belted car system in vehicle
seats where an active frontal airbag is installed. The large-volume
front airbag expands explosively and may cause your child serious
injury or even death.
• Do not use the product, unless all its components are properly fastened and
adjusted.
• Do not use the product if any components are broken or missing.
• Assembly, disassembly and adjustment operations must be carried out only by
adults. Make sure that the person using the product (baby-sitter, grandparents, etc.)
are aware of the correct operation of the same.
• Verify the correct hooking of all components of the Darwin Infant Belted car
system before each travel and/or when the vehicle is subject to periodical checks,
maintenance, and cleaning. Other people may have tampered with and/or unhooked
the Darwin Infant Belted car system and may not have repositioned the same properly
pursuant to the instructions.
• Check that all safety belts tightening the base to the car seat are always fastened
and tensioned. Periodically check the seat unit belts for proper retaining performance.
• Check that straps with buckles are not twisted and are not trapped in the car door
or the mobile parts of the child seat.
• Check that all the mechanisms locking the child car seat to the base are engaged
correctly before and during use.
• Avoid inserting fingers inside mechanisms.
• Check that rigid items and plastic parts of the child car seat are located and installed
so that they are not liable, during everyday use of the vehicle, to become trapped by
a movable seat or in a door of the vehicle.
13
Advertisement
