Advertisement
6 Alignments and Adjustments
2.
3.
Press buttons
11 and 12 and buttons 1 and 2
to make the video white.
(For 9300° K color adjustment:
x = 0.28340.02,
y = 0.298+0.02.)
Note: Do not touch buttons 6 and 7.
Press button 5 to save the data.
6-5-1 (d) White Balance Fine Adjustment
(x = 0.28340.02,
y = 0.298+0.02,
Full White pattern)
Note: Do not touch buttons 6 and 7 (G-Gain).
1. Adjust the contrast control so that the
brightness of the video is about 5 ft-L.
Check whether the white coordinates of the
video meets the above coordinate spec.
Adjust the contrast control so that the
brightness of the video is about 20 ft-L.
Check whether the white coordinates of the
video satisfies the above spec.
. If the white balance differs from the above
spec, readjust it to within specifications.
When correct, press buttons 5 to save.
6-5-1 (e) ACL point Adjustment
Ny
. Display the full white pattern.
Turn the contrast and the brightness
controls fully clockwise.
Press buttons 3 and 4 (ACL) so that the
brightness is 30 +1 ft-L.
Press button 10 to save the ACL setting
value.
Samsung Electronics SyncMaster 17GLi
6-5-2 Color Adjustments for 6500°K
6-5-2 (a) Back Raster Color Adjustment
1. Display the back raster pattern.
2. Turn the contrast and the brightness
controls fully clockwise.
3. Press button 9 to load the standard color
data for 6500°K from micom control jig.
4. Adjust the brightness of the back raster to
set 0.5 to 1.0 ft-L and press button 21 or 22
(G-Bias control). If you don't need to adjust
the brightness, skip this step.
Note: For 6500° K adjustments you must
not control the screen VR of the FBT. If you
do so, the 9300°K setting values are
changed.
5. Using buttons 26, 27, 16 and 17, adjust the
R-Bias to x = 0.313+0.02, B-Bias to
y=0.329+0.02.
6. Press button 5 to save the bias data for
6500°K.
6-5-2 (b) Video Gain Adjustment
1. This procedure is the same as that of
9300°K.
2. Refer to the procedure for 9300°K on
page 6-6.
6-5-2 (c) White Balance Adjustment
1. Display a full white pattern.
2. Turn the contrast and the brightness
controls fully clockwise.
3. Using buttons 11, 12, 1 and 2, set the R/B
gain data to x= 0.31310.02, y=0.329+0.02.
6-5-2 (d) White Balance Fine Adjustment
Refer to the procedure for 9300°K on page 6-7.
6-5-2 (e) ACL Point Adjustment
Refer to the procedure for 9300°K on page 6-7.
6-7
Advertisement
