Advertisement
3 Operating Instructions
Position (H/V) / User, Preset Mode
First Function: Position (H/V)
Push this button once to adjust the
horizontal and vertical position (centering)
of the display.
Horizontal position control
Push position button and adjust horizontal
position with left ( < ) and right ( > )
buttons.
Vertical position control
Push position button and adjust
vertical position with up ( A ) and down
( ¥ ) buttons.
Second Function: User, Preset Mode
Push this button twice to access the user
and preset modes. The OSD shows the
contents of the user modes and factory
preset timing modes. Use the adjustment
control buttons to "page" through the list.
Size (H/V) / Information:
First Function: Size (H/V)
Push this button once to adjust the
horizontal and vertical size of the display.
Horizontal size contro!
Push size button once and adjust
horizontal size (width) with left (<4) and
right (
) buttons
Vertical size control
Push size button once and adjust vertical
size (height) with up ( A ) and down ( ¥)
buttons
Second Function: Information
Push this button twice to access the
Information function. The OSD shows the
values for this monitor's specifications.
Use the Adjustment Control buttons to
page through the list.
Samsung Electronics SyncMaster 17GLi
G/D (Geometric distortion):
OQ
First Function: Pincushion/ Trapezoid
Push this button once to correct for
pincushion and trapezoid distortions of
the display.
Pincushion control
Push G/D
button once to display the
pincushion OSD. To correct the vertical
sides of the display area from bowing in
(pincushion) or bowing out (barrel
distortion), use the left ( <q) and right
( > ) buttons until the sides are straight
Trapezoid control
Push G/D
button once to display the
pincushion OSD. Push either the up ( A)
or down ( ¥ ) button to display the
trapezoid OSD. Use the up ( & ) and down
( ¥ ) buttons again to correct any
trapezoidal distortion of the display.
Second Function: Parallel/Tilt
Push this button twice to adjust the
Parallel and Tilt of the display.
Parallel control
Push G/D
button twice to display the
parallel OSD. Adjust the parallel of the
display with the left (<4) and right ( > )
buttons.
Tilt control
Push G/D
button twice to display the
tilt OSD. Push either the up ( A ) or down
( V ) button to display the tilt OSD. Use
the up (A) and down ( W) buttons again
to correct tilt of the display.
Color Temperature
ss00k
Use this button to choose the color
$300K
temperature of the display. After pushing
the color temperature button, use the up
(A) or down ( W) button to select between
9300°K color (channel 1) and 6500°K color
(channel 2).
3-5
Advertisement
