Advertisement
6 Alignments and Adjustments
6-3 Using the Microcomputer Control Jig
Table 6-1. Micom Control Jig Function Keys
= | ss
Key Function
Key Function
Horizontal Position Right
R-Gain Up
Horizontal Position Left
R-Gain Down
Parallelogram Up
ACLUp
ACL Down
Color Save
G-Gain Up
2 ee ee]
DEO
fae [se v9 [45]
[16 [a7 |e [19 | a0)
BIG
| 26 || 27 [Pam 29 |[ 30,
Notes:
Parallelogram Down
Mode Save
Horizontal Size Up
G-Gain Down
Color CH-1 Standard Save
Color CH-2 Standard Save
ACL Save
B-Gain Up
B-Gain Down
No Function (Don't Use)
No Function (Don't Use)
No Function (Don't Use)
R-Bias Up
R-Bias Down
No Function (Don't Use}
No Function (Don't Use}
No Function (Don't Use)
G-Bias Up
G-Bias Down
Color/General Control toggle
F-Project/M-Project toggle
Model Selection
B-Bias Up
B-Bias Down
No Function (Don't Use)
Shift
Manual/Auto Color Control
Horizontal Size Down
Vertical Linearity Up
Oo
oO
NY
DD
oO
fF
WH
DY
Vertical Linearity Down
Standard Save
Changes made without the micom jig are saved
only to the user mode settings. As such, these
setting are not permanently stored and may be
inadvertently deleted by the user.
Vertical Position Up
Vertical Position Down
Pinbalance Up
Pinbalance Down
All mode save
Vertical Size Up
Vertical Size Down
Tilt Up
Tilt Down
User Made Delete
Barrel
Pincushion
Color/General Control toggle
F-Project/M-Project toggle
Model Selection
Selecting the monitor series and type:
1. Simultaneously press buttons 29 and 24 to
select "M-Project" as the monitor series.
2. Press button 25 to select the monitor type.
Hold down button 25 until you see "M17L"
plus the OEM name for the monitor under
test. For example, hold down button 25 until
you see "M17L" if you are working on a "Dell
17."
Trapezoid Up
Trapezoid Down
No Function (Don't Use)
Shift
No Function (Don't Use)
Advertisement
