Get Started; Prepare The Remote Control; Charge The Battery - Philips PB9001/51 User Manual

3 Get started

Prepare the remote control

Danger
•
Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
a Press and push the battery compartment to slide it open (see "1" in
the illustration).
b Insert two AAA batteries with correct polarity (+/-) as indicated.
c Push and slide back the battery compartment (see "3" in the
illustration).
a
Note
•
If you are not going to use the remote control for a long time, remove the batteries.
•
Do not mix batteries (old and new or carbon and alkaline, etc.).
•
Batteries contain chemical substances, so they should be disposed of properly.

Charge the battery

Caution
•
Risk of product damage. Ensure that the power supply voltage corresponds to the
voltage printed on the bottom of the player.
•
Use only the supplied AC adaptor to charge the battery.
b c
EN
17