Philips AZ 8491 Manual page 7

COMPACT DISC
SEARCH Id - D
These buttons have three different functions:
1. Press briefly (less than 1 second) during PLAY or
INTROSCAN
Pi - go to the next track (title)
You can jump to the next title by pressing Pl once. The
next track number appears on display, playback is
interrupted and the next track is played.
if you want to skip more than one track, then press P
more than once until the display shows the desired track
number.
H - go to the previous track (title)
If you want to repeat the running title from the beginning,
press K once: playback is interrupted and the same
track is played from the beginning.
If you want to repeat one of the previous titles, press К
more than once until the display shows the required track
number.
2. Keep pressed (longer than 1 second) for search
during PLAY
In this way, the disc is played at high speed in the forward
Pl or backward Ч direction. The sound is reproduced
partly and at high speed, however, it is still recognizable.
Іп this way you can locate rapidly a certain passage within
a track.
Keep the button PI (search forward) or К (search
backward) pressed until you recognize the required
passage. Then release the button: the dísc will be played
back in the normal way from this passage.
If the button is pressed longer than 10 seconds, the
search speed increases automatically.
3. When programming: press briefly (less than 1 se-
cond)
When programming - in positon STOP O with a disc
inserted - you can select the desired track numbers using
H and Pi
PROGRAMMING TRACK NUMBERS
You may select a number of tracks and store these in the
memory inthe desired sequence. When playing, you will only
hear the stored titles in the selected sequence. At most,
26 tracks can be stored in the memory. You may store each
track more than once.
Manual selecting
e Load the disc, but do not press PLAY Е> yet.
e Select the desired track using the buttons K and Pluntil
the display shows the required track number.
e Store this track by pressing STORE.
e Select and store in this way all desired titles.
Storing during INTROSCAN
e Press INTROSCAN to play the first few seconds of each
track.
e Press STORE as soon as you recognize a desired title.
Storing during PLAY
e During normal PLAY you may store the running title by
pressing STORE.
— After pressing STORE the character 'P' (PROGRAM)
appears, indicating that the track has been stored.
— Store all desired titles in the required sequence. You may
store each track more than once.
— At most, 26 tracks can be stored in the memory. When the
memory is full, the character 'F (FULL) appears.
— When pressing MEMORY, the display will show in sequen-
ce all stored track numbers.
— You can simply erase the whole memory by pressing
CLEAR: the character 'C' for CLEAR appears now.
The contents of the memory are also erased:
— by opening the disc cover using CD A (3);
— if you move the MODE selector ($);
— if you switch off the set with POWER switch (3;
— ifthe batteries get exhausted or if the power supply is
interrupted in another way.
How to play the stored selection
To play your selection, the CD-player should be in position
STOP; then press PLAY œ: now, the word MEMORY
appears.