Table of Contents
Advertisement
aLTERnaTIvE PROgRaMMIng OPTIOns
alternative programming option for products with a Program/LEaRn Button
The Program/LeaRn button is typically located on the product or an external receiver. For help locating your Program/LeaRn button
refer to the Help section in this manual or contact your product manufacturer.
The images throughout this manual are for reference only and your product may look different.
** LiftMaster, Do-It, Master Mechanic, Raynor, True Value and Sears Craftsman are compatible with Chamberlain technology.
1
Press the program button on the remote control until
the LED turns on.
LED
Program Button
3
Press and release the remote control button...
...8 times
( Chamberlain
...3 times
( Chamberlain
...2 times
( Chamberlain
...4 times
( Chamberlain
... 5 or 6 times ( Overhead Door
...1 time
(Linear
...7 times
(Stanley
...9 times
(Wayne Dalton
The LED on the remote control must stop blinking between each press of the button. The code is accepted when the product
responds by clicking, blinking, or activating.
4
Press the program button on the remote control to
save.
Program Button
** product with yellow Program/LEARN button).
®
** product with purple Program/LEARN button).
®
** product with orange Program/LEARN button).
®
** product with green Program/LEARN button).
®
Genie
Intellicode product).
®
®
Mega-Code product).
®
Secure Code product).
®
Rolling Code product).
®
2
P ress and release the Program/LEARN button* on your
product.
* D epending on your product, the Program/LEARN button may have a different
name (use the button for programming remote controls).
5
Test the remote control by pressing the button. If the
product does not activate, repeat the programming steps.
16
Advertisement
Table of Contents
