Commercial Door Operators; Programming To A Commercial Door Operator With A Program/Learn Button - Chamberlain G953EV-P2 Getting Started

COMMERCIaL DOOR OPERaTORs

Programming to a Commercial Door Operator with a LEaRn Button
The Program/LeaRn button is typically located on the logic board of the operator or an external receiver. For help locating your
Program/LeaRn button contact your commercial door operator manufacturer.
The images throughout this manual are for reference only and your product may look different.
1
Press the program button on the remote control until
the LED turns on.
LED
Program Button
3
Press and release the remote control button, the LED will
flash. When the LED stops flashing, continue to press
and release the button until your commercial door
operator responds by clicking, blinking, or activating.
5
Test the remote control by pressing the button. If the commercial door operator does not activate, repeat the programming
steps or follow the alternative programming option.
2
P ress and release the Program/LEARN button* on your
commercial door operator.
* D epending on your product, the Program/LEARN button may have a different
name (use the button for programming remote controls).
4
Press the program button on the remote control to save.
Program Button
10
Program/LEARN
Button*