Ryobi 280r Operator's Manual page 16

MAINTENANCE AND REPAIR INSTRUCTIONS
1. Grasp the air filter cover and press in with your
thumb to reíease. Remove the cover from the aír filter
base (Fig. 25).
2. Turn the air filter cover over and remove the air filter
from the inside (Fig. 26).
3. Wash the filter in detergent and water (Fig. 27). Rinse
the filter thoroughly. Squeeze out excess water and
allow it to dry completely.
4. Apply enough clean SAE 30 oil to lightly coat the filter
(Fig. 28).
5. Squeeze the filter to spread the oil and remove the
excess (Fig. 29).
6. Carefully reinstall the air filter. Be sure the filter is
seated properly before reinstalling it on the air filter
base (Fig. 30).
i \
PRESSIN
16