Function Setup; Standby Through; Hdmi Auto Lipsync; Audio Output - Yamaha RX-V1065 Owner's Manual

Operating various settings for this unit (Setup menu)
Max Outputs sound without adjusting the
dynamic range of the input signals.
■
Lipsync
Adjusts delay between video output and audio output.

HDMI Auto Lipsync

Choices: Off*, On
Automatically adjusts output timing of audio and video
signals when a TV that supports an automatic lip-sync
function is connected to this unit.
Off Select this when the connected TV does not
support the automatic lip-sync function or
you do not use the automatic lip-sync
function. Set the correction time in "Manual
Delay".
On Select this when the connected TV supports
the automatic lip-sync function. Fine adjust
the correction time in "Auto Delay".

Auto Delay

Adjustable range: 0* to 240ms (1 ms step)
Fine adjust the correction time when "HDMI Auto
Lipsync" is set to "On". The actual correction time is
displayed under in "Auto Delay" field and an offset time
set by the user in "Offset" field.

Manual Delay

Adjustable range: 0* to 240ms (1 ms step)
Manually fine adjusts the correction time. Select this when
the connected TV does not support the automatic lipsync
function or you set "HDMI Auto Lipsync" to "Off".

Function Setup

You can set various items for HDMI and display.
HDMI
You can set items for HDMI.
■

HDMI Control

Choices: On, Off*
Selects on or off of the HDMI control function when a
component that supports the HDMI control function is
connected with this unit. When this parameter is set to
"On", this unit output signals input from the HDMI 1-4
jacks to the video monitor even when this unit is on
standby.
On Enables the HDMI control function.
Off Disables the HDMI control function.
y
• The BHDMI THROUGH indicator lights up in the following cases
while this unit is on standby.
– when the HDMI control function is on
– when the HDMI signal standby-through function is currently working
• When "HDMI Control" is set to "On", this unit consumes 1 to 3 watts of
power depending on a condition of an HDMI signal passing through this
unit.
58
En
■

Standby Through

Choices:
On, Off*
Selects on or off of output of HDMI signals input from the
HDMI 1-4 jacks to the HDMI OUT jack when this unit is
on standby. When this parameter is set to "On", this unit
output signals input from the HDMI 1-4 jacks to the video
monitor even when this unit is on standby.
On Outputs the HDMI signals to the HDMI OUT
jack.
Off Not output the HDMI signals to the HDMI
OUT jack.
y
• This parameter is not available when "HDMI Control" is set to "On".
• To enables HDMI signal standby-through output, any one of the input
sources connected to the HDMI 1-4 jacks must be selected before
switching to standby.
• When "Standby Through" is set to "On", the BHDMI THROUGH
indicator lights up. In this state, this unit consumes up to 3 watts of power
even on standby.
■

Audio Output

Choices: Amplifier*, TV, Amplifier + TV
Selects this unit or a component connected to the HDMI
OUT jack of this unit for reproducing sound signals input
from the HDMI 1-4 jacks.
Amplifier Outputs HDMI sound signals form the
speakers connected to this unit.
TV Outputs HDMI sound signals from the
speakers of a TV connected to this unit.
Sound output from the speakers connected to
this unit is muted.
Amplifier + Outputs HDMI sound signals from the
TV speakers connected to this unit and the
speakers of a TV connected to this unit.
Note
• Signal formats of audio and visual signals output from this unit to the TV
vary depending on specifications of the monitor.
y
• This parameter is not available when "HDMI Control" is set to "On".
■
Resolution
Choices: Through*, 480p, 720p, 1080i, 1080p
Upscales the resolution of HDMI output that is converted
from analog video input signals and output from the
HDMI OUT jack.
Notes
• Resolution of the HDMI output converted from 720p or 1080i analog
video signals cannot be upscaled.
• When a video monitor is connected to the HDMI OUT jack of this unit,
this unit automatically detects a resolution that the monitor supports. An
asterisk (*) appears on the left of the detected resolution.
• If this unit cannot detect the resolution that the monitor supports, set
"MON.CHK" in the advanced setup menu to "SKIP" (page 64) and try
again.