Yamaha RX-V1065 Owner's Manual page 101

Additional feature
Now you can select the video to be output when "AUDIO1" or "AUDIO2" is selected as the input source.
For example, if you want to use an external component with analog audio and component video (or composite) output
jacks; connect the analog audio output jacks of the external component to the AUDIO 1 or AUDIO 2 jacks of this unit
while making a video connection (component video or composite).
Then follow the procedure below to select the video to be output when "AUDIO1" or "AUDIO2" is selected as the input
source.
1
Rotate the RINPUT selector (or press
dAUDIO 1 or dAUDIO 2) to select
"AUDIO1" or "AUDIO2" as the input source.
2
Press rOPTION on the remote control.
The Option menu for "AUDIO1" or "AUDIO2" is
displayed.
3
Press jCursor k / n to select "Video Out"
and then press jENTER.
Video;;;;;;Off
4
Press jCursor l / h to select a video input
jack to be used when "AUDIO1" or "AUDIO2"
is selected as the input source and then
press jENTER.
– AV1-2 (COMPONENT VIDEO)
– AV3-6 (VIDEO)
– V-AUX (VIDEO)
– Off (no video output)
y
• "Off" is selected by default.
5
To exit the Option menu, press rOPTION.
U
RX-V1065