Warning. Read Before Using Analyzer - Gasmet GT5000 Instructions And Operating Manual

WARNING. READ BEFORE USING ANALYZER

To avoid possible electrical shock or personal injury, follow these guidelines:
- Use the analyzer only as specified in this manual or the analyzer could be irreversibly damaged.
- Do not use the analyzer or probe or external AC/DC power supply unit
damaged, or if they operate incorrectly. If in doubt, have the analyzer serviced by trained service
personnel.
- Always use the proper original Gasmet parts, and respect Gasmet suggested measurement
conditions.
- Do not apply an input AC voltage to the external AC/DC power supply unit different than what
indicated on the external AC/DC power supply unit name plate.
- Always use a proper earth ground under external AC/DC power supply unit use.
- Do not use the analyzer in EX rated areas.
-The AC/DC PSU must not be used in wet conditions
-In humid conditions, the analyser and battery should be operated only in portable mode with battery
lid closed
- Do not drop or cause mechanical shock to the analyzer.
- Ensure that a sample tube is connected to SAMPLE IN connector before starting the sample pump.
Otherwise the valve in the sample inlet will not open.
- The GT5000 Terra Instruction and Operating Manual should be read and understood before
operating your unit.
1: AC/DC PSU will later refer to external AC/DC power supply unit.
SYMBOLS
AC (Alternating Current)
Important information, refer to manual
Conforms to European Union Directives
Gasmet GT5000 Terra Instruction and Operating Manual
1
or battery if they appear
DC (Direct Current)
WEEE symbol (Waste Electrical and
Electronic Equipment Directive)
Canadian Standards Association
3