Storage And Packaging Conditions; Figure 1. Attaching The Backpack Harness To Gt5000 Terra. 1. Attach The Connective Metal Pieces - Gasmet GT5000 Instructions And Operating Manual

Figure 1. Attaching the backpack harness to GT5000 Terra. 1. Attach the connective metal pieces to
the loops on the back of the analyzer. 2. Place the harness on top of the analyzer. Align it so that the
loops on the sides of the metal pieces go through the holes on the harness. Pull the Velcro taped
strands downwards through the metal pieces, under the edge of the harness, back through the metal
loops and attach. 3. Make sure that the harness is well attached.
Care should be taken when using the backpack harness. The user is responsible of the safekeeping
and correct use of the harness.

4.3. Storage and Packaging Conditions

The analyzer must be stored in a dry and condensation-free place. Gasmet original package
(wooden box) or optionally GT5000 Terra transport case must be used to store the equipment.
The following long-term storage conditions should be respected:
> +10 - +35 ↓C storage temperature
> 5 - 95 % relative humidity, non-condensing
> Gasmet battery should be stored at 15 % to 50 % state of charge with an ambient temperature
preferably not exceeding +30 °C.
For short term storage, e.g. during shipping, the following conditions can be tolerated:
> -20 - +45 ↓C for a period of 12 hours
> 5 - 95 % relative humidity, non-condensing
Do not drop the analyzer even when stored in its original package (wooden box) or in its transport
case.
Keep the box and packaging materials, in case the unit needs to be returned for service.
Gasmet GT5000 Terra Instruction and Operating Manual
12