9. DATA SELECTION
1. Enter Service mode
1) Select the Service mode.
2) Press MENU button on TV to
select data on/off.
TV mode
(Adjustment mode)
When QA02 is initialized, items "OPT" of SERVICE MODE are set to the data of the representative model of this chassis family.
Therefore, because ON-SCREEN specification remains in the state of the representative of model. This model is required to
reset the data of items "OPT".
2. SELECTING THE ADJUSTING ITEMS
Every pressing of POSITION 4A or ¥ button in the service mode changes the adjustment items in the order of table-3.
ee
e
3. ADJUSTING THE DATA
Pressing of VOLUME & or ¥ (4 +/—) button will change the value of data.