Exit From Service Mode - Toshiba 28N03F Service Manual

4. SELECTING THE ADJUSTING ITEMS
1)Every pressing of CHANNEL A button in the service mode changes the adjustment items in the order of table-2.
(¥ button for reverse order)
'5 acess
5. ADJUSTING THE DATA
1) Pressing of VOLUME .1 +/— button will change the value of data in the range from OOH to FFH. The variable range
depends on the adjusting item.
6. EXIT FROM SERVICE MODE
1) Pressing POWER button to turn off the TV once or putting the set to Std. by mode by HHU.
m@ INITIALIZATION OF MEMORY DATA OF QA02
After replacing QA02, the following initialization is required.
. Enter the service mode, then select any register item.
_"
7. TEST SIGNAL SELECTION
N/A (Not available on this model)
<
2.
oe
=
—
=)
oy
=
om