1. Manuals
  2. Brands
  3. TURFCO Manuals
  4. Farm Equipment
  5. WIDESPIN 1550
  6. Operator's manual

TURFCO WIDESPIN 1550 Operator's Manual

Tow behind no engine broadcast top dresser electronic control
Hide thumbs
Table of Contents

Advertisement

Quick Links

TM
Broadcast Top Dresser
OPERATOR'S MANUAL
MAINTENANCE MANUAL
TURFCO
WIDESPIN
Tow Behind No Engine
Broadcast Top Dresser
Electronic Control
Product Number 85824
Starting Serial Number T01201
US Patent 6,149,079, 6,508,419 and 6,817,552
Manual Number 669320-GB Rev A
DANGER -
IF INCORRECTLY USED THIS MACHINE CAN CAUSE SEVERE INJURY.
THOSE WHO USE AND MAINTAIN THIS MACHINE SHOULD BE TRAINED IN ITS
PROPER USE, WARNED OF ITS DANGERS, AND SHOULD READ THE ENTIRE MANUAL
BEFORE ATTEMPTING TO SET-UP, OPERATE OR SERVICE THE MACHINE.
1655 101st Avenue NE • Minneapolis, Minnesota 55449-4420 USA
Phone (763) 785-1000 • FAX (763) 785-0556
PARTS LIST
™
Additional Patents Pending
TURFCO MFG. INC.
2014 Turfco Mfg., Inc.
®
1550

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WIDESPIN 1550 and is the answer not in the manual?

Questions and answers

Related Manuals for TURFCO WIDESPIN 1550

Summary of Contents for TURFCO WIDESPIN 1550

  • Page 1 PROPER USE, WARNED OF ITS DANGERS, AND SHOULD READ THE ENTIRE MANUAL BEFORE ATTEMPTING TO SET-UP, OPERATE OR SERVICE THE MACHINE. TURFCO MFG. INC. 1655 101st Avenue NE • Minneapolis, Minnesota 55449-4420 USA Phone (763) 785-1000 • FAX (763) 785-0556 2014 Turfco Mfg., Inc.

  • Page 2: Table Of Contents

    Description - WIDESPIN 1550 Broadcast Top Dresser ............18 Intended Use and Function ................18 Location and Description of the WIDESPIN 1550 Major Components ....19 Location and Description of the Operator Position and Operator Controls ..19 Operation - Tow Vehicle and Tow Vehicle Hitch Requirements ..........22 WIDESPIN 1550 Towing Speeds and Maximum Angle of Operation ....22...

  • Page 3: Product Identification

    ATTACHMENT Product Records IMPORTANT: Record the information from the serial number plate of your Turfco WideSpin 1550 Broadcast Top Dresser. It will be necessary to furnish your Product Number and Serial Number when ordering parts. WideSpin™ 1550 Broadcast Top Dresser...

  • Page 4: Specifications

    SPECIFICATIONS Specifications Intended Use: The Turfco WIDESPIN™ 1550 Broadcast Top Dresser is a towed-type (no engine) broadcast top dresser. The 1550 is intended to be used for the application of properly prepared organic top dressing material. The 1550 is NOT intended to be used for any purpose other than the application of properly prepared organic top dressing material.

  • Page 5: Mounting Kits

    TRADEMARKS AND PATENTS Mounting Kits The WideSpin 1550 No Engine Tow Behind Top Dressers, Product Numbers 85824 and 85825, require a mounting kit that has hydraulic hoses and an electrical supply cable designed to fit certain tow vehicles. Available mounting kits for the 85824 & 85825 are as follows: Turfco 86190 - Hydraulic Hoses and Electrical Cable for a Cushman Turf Truckster Equipped With Remote Hydraulics and HI-LO Hydraulic Accessory Kit.

  • Page 6: Recognizing Safety Warnings And General Safety Practices

    SAFETY Recognizing Safety Warnings Used In Manual LOOK FOR THE SAFETY HAZARD WARNING SYMBOL The symbol is used to alert the operator of safety hazards. It is used in conjunction with the words DANGER, WARNING, and CAUTION. DANGER WARNING CAUTION “DANGER”...
  • Page 7 SAFETY • Do not operate any equipment at unsafe speeds. • Do not strike the flywheel with a hammer or any Speeds should be reduced when turning or operating hard object. This may cause the flywheel to shatter in on slopes. The operator must use common sense to operation.

  • Page 8: Setup And Assembly

    SETUP AND ASSEMBLY Setup and Assembly WARNING SAFETY FIRST!! Work Safely and Follow All Safety Warnings. Wear the Appropriate Personal Safety Gear. Use Caution When Working Near Moving Parts. Be Aware Of High Hydraulic Operating Pressures and Temperatures. AS85824-10 WARNING FIGURE 1 To Avoid Serious Injury, Never Place Yourself or Any Part of Your...
  • Page 9 SETUP AND ASSEMBLY [10] FIGURE 2 AS85824-21 TONGUE AND HITCH ASSEMBLY (See Figure 2) Step C. Insert the tongue and hitch assembly [4] into the front of the 1550 frame. Insert until both holes in the tongue line up with both holes in the frame [5]. ●...
  • Page 10 SETUP AND ASSEMBLY [12] [13] [15] [11] [16] [14] [13] FIGURE 3 AS85824-19 SPINNER ASSEMBLY MOUNTING BRACKET (See Figure 3) Step D. Attach the spinner assembly mounting bracket [11] to the top dresser frame. ● Use 3/8”-16 x 1” hex head screws [12], 7/8” OD flat washers [13] and 3/8”-16 nylock nuts [14] to attach the bracket to the frame (six places, three per side).
  • Page 11 SETUP AND ASSEMBLY [18] [15] [20] [19] [21] [17] [22] FIGURE 4 AS85824-18 SPINNER ASSEMBLY (See Figure 4) Step E. Attach the spinner assembly [17] to the spinner mounting bracket. The spinner assembly weighs 68 Kg (150 pounds). Use proper lifting equipment and techniques. ●...
  • Page 12 SETUP AND ASSEMBLY HOPPER ASSEMBLY (See Figure 5 and Figure 6) Step F. Attach the front hopper seal [23] to the outside ● Use 1/4” x 5/8” long hex head Whiz-Lock screws of the front hopper panel [24]. [29] and nuts [30] (Quantity 5 each panel). Tighten screws securely.
  • Page 13 SETUP AND ASSEMBLY ● The ends of the front seal [37] should lay atop the ● Attach the sides of the panels with and 1/4” x 5/8” front ends of the side seals. long hex head Whiz-Lock screws [34] and nuts [35] down each corner (Quantity 2 per side panel).
  • Page 14 SETUP AND ASSEMBLY INSTALLATION OF HOPPER TO THE WIDESPIN 1550 FRAME (See Figure 7) Step M. Attach the hopper to the frame using 1/4” x 5/8” Step L. Set the hopper assembly on the 1550 frame. hex head Whiz-Lock screws [49] and nuts [50].
  • Page 15 SETUP AND ASSEMBLY HOPPER ALIGNMENT (See Figure 7 & Figure 8) [59] Step P. Check the alignment of the hopper to the 1550 frame. The metering gate should be level [58] with the surface of the conveyor belt (metering gate does not fully close to the surface of the conveyor belt).
  • Page 16 SETUP AND ASSEMBLY [63] [61] AS85824-05 FIGURE 9 [62] SPINNER SHIELD ● Wind up excess cable on the cable bracket [68] on (See Figure 9) the side of the hopper. Step T. Install the spinner shield. ● Hang the display box on the bracket [69] on the side of the hopper.
  • Page 17 SETUP AND ASSEMBLY HYDRAULIC HOSES AND THE ELECTRICAL POWER SUPPLY CABLE ARE PART OF THE MOUNTING KIT [67] [65] [64] [66] [69] [68] 20 PSI (138 kPa) AS85824-20 FIGURE 10 85824 RevA...

  • Page 18: Description

    INTENDED USE AND FUNCTION ● Do Not Use With Rocks, Unscreened, or The WIDESPIN 1550 is intended to be used for the Non–Organic Top Dressing Material. application of properly prepared organic top dressing ● Do Not Allow Anyone To Stand Behind the material.

  • Page 19: Location And Description Of The Widespin 1550 Major Components

    DESCRIPTION LOCATION AND DESCRIPTION OF THE WIDESPIN Conveyor Belt: The rough surfaced belt carries the 1550 BROADCAST TOP DRESSERS MAJOR top dressing material from the hopper, through the COMPONENTS (See Figures 11, 12, 13 and 14) metering gate, and on to the spinner wheels. Power to the belt is provided by the hydraulic conveyor belt drive See Figure 11, 12, 13 and 14 for the location of the motor.
  • Page 20 DESCRIPTION RECEIVER METERING GATE AND METERING GATE ADJUSTMENT HANDLE HEAVYSPREAD DIVERTER AND LOCKING KNOB SPINNER ASSEMBLY DISPLAY DS85824-12 SPINNER ASSEMBLY RIGHT AND LEFT HAND TILT CONTROL SPINNER WHEELS AND ADJUSTABLE VANES AND LOCKING HANDLE FIGURE 13 Left and Right Hand Spinner Wheels: The Operator Position: The proper location for the operator hydraulically powered spinner wheels are rotating of the 1550 Top Dresser is seated in the tow vehicles...
  • Page 21 DESCRIPTION SPINNER AND SCREEN DISPLAY CONVEYOR BELT USED TO SHOWS SPEEDS, APPLICATION ON/OFF SWITCH CALCULATIONS AND CHARTS “OK” BUTTON USED TO RETURN TO START-UP SCREEN FUNCTION KEYS USED TO SELECT SCREENS AND PRESET SPEEDS DS85824-03 SCROLL KEY USED TO CHANGE SPINNER AND BELT SPEEDS FIGURE 14 The ON/OFF Switch Metering Gate and Metering Gate Adjusting Handle:...

  • Page 22: Operation

    WARNING to the tow vehicle. TO AVOID SERIOUS INJURY WARNING and To Avoid Damage to the WIDESPIN 1550 Top Dresser and the Tow Vehicle, TO AVOID SERIOUS INJURY, Do Not Operate on Slopes Over 15° Degrees. The Tow Vehicle Must Be Equipped With An...

  • Page 23: Widespin 1550 Operator Position

    TO AVOID SERIOUS INJURY, from earlier use. Hopper must be empty. Always Operate the WIDESPIN 1550 From the Operators Position at the Tow Vehicle’s Seat. LOADING OF HOPPER Always Stop the Tow Vehicles Engine, Set the The maximum hopper capacity is 0.71 cubic meters (25...
  • Page 24 OPERATION LIGHTSPREAD™ HEAVYSPREAD™ WARNING TO AVOID SERIOUS INJURY, Always Stop the Engine Before Making Any Lightspread or Heavyspread Adjustments. LIGHTSPREAD™ HEAVYSPREAD™ HEAVYSPREAD™ LIGHTSPREAD™ ADJUST METERING GATE ADJUST IN THE “LIGHTSPREAD" METERING GATE WITHIN RANGE. “HEAVYSPREAD" RANGE. RAISE AND LOCK IF NEEDED, LOWER AND DIVERTER AT “A”.

  • Page 25: Setting Operator Controls For Lightspread Or Heavyspread Operations

    HeavySpread applications. For a very light OP85824-02 application, the angle can be adjusted at 25% to 0%. SETTING WIDESPIN 1550 METERING GATE For a very heavy spread application, the angle can be (See Figure 15) adjusted at 75% to 100%.

  • Page 26: Operating Display Box

    When the power supply cable from the tow vehicle is box hangs on the side of the hopper. Wind the display plugged in to the top dresser, the TURFCO start-up box cable up on the cable hanger. DO NOT put the box screen will be displayed.
  • Page 27 OPERATION Chart CHART SCREEN: Push the function key directly Pushing the function key under the SETTING CHART Chart below CHART icon on the start-up screen. It will on this screen change the screen to the Lookup Chart change the display to the Lookup chart screen. Screen.

  • Page 28: Setting Spinner Speed

    OPERATION SCROLL TO SELECT SPINNER OR BELT CHANGING SPINNER OR BELT SPEEDS Spinner SPINNER SPEED DISPLAY Spinner % Belt Belt % YELLOW SHOWS IF A BELT SPEED DISPLAY PRESET IS SELECTED YELLOW WILL TURN TO BLACK IF PRESET SPEEDS ARE CHANGED SCROLL KEY UP INCREASES SPINNER SPEED SCROLL KEY RIGHT SCROLL KEY LEFT...
  • Page 29 OPERATION Spinner SPINNER SPEED DISPLAY SELECTING PRESET Spinner % Belt SPINNER AND BELT SPEEDS Belt % BELT SPEED DISPLAY YELLOW SHOWS IF A PRESET IS SELECTED YELLOW WILL TURN TO BLACK IF PRESET SPEEDS ARE CHANGED PRESET “D” PRESET “A” OP85822-45RevA PRESET “B”...
  • Page 30 OPERATION USING UNIT ADJUSTMENT SCREEN - CALCULATION UNITS (See Figure 24) Go to the Unit Adjustment screen “Calculation Units” by pressing the function key directly under UNITS METRIC on the start-up screen. The Unit Adjustment screen is for changing the values of the display between English or THE LEADER.

  • Page 31: Using Unit Adjustment Screen - Calculation Screen

    OPERATION USING UNIT ADJUSTMENT SCREEN - BACKLIGHT VALUE (See Figure 25) Go to the Unit Adjustment screen “Backlight Value” by pressing the function key directly under UNITS METRIC on the start-up screen. The Backlight Value is for changing the lightness/darkness of the display screen. This can NCE 1961 THE LEADER.

  • Page 32: Using Application Calculation Screen

    OPERATION USING APPLICATION CALCULATION SCREEN (See Figures 27, 28, 29 and 30) To go to the Application Calculation screen by pressing the function key directly under CALCULATOR Icon on the start-up screen or by pushing the function key under the “Calc Page”...
  • Page 33 OPERATION FOR CALCULATING SETTINGS ONLY - ACTUAL SETTINGS ON THE RUN SCREEN DO NOT CHANGE. PRESETS DO NOT CHANGE. CALCULATING CALCULATING METERING GATE AREA OPENING Estimation at 3.0 MPH Estimation at 3.0 MPH Estimation at 4.8 KM/H Area - Square Feet Area - Square Feet Area - Square Meters YELLOW...

  • Page 34: Top Dressing Operation

    TO AVOID SERIOUS INJURY, and To Avoid Damage to the 1550 Top Dresser, Do Not Tow or Operate At Speeds Over WIDESPIN 1550 SHUTDOWN AND UNHITCHING 12.8 Km/h (8 MPH). After operation, stop the power to the conveyor belt Start and stop the top dressing operation using the and the spinner assembly.

  • Page 35: Operator Daily Inspection

    Storage ● Inspect for damaged or missing guards on the 1550 and the spinner assembly. Do not operate TO STORE THE WIDESPIN 1550 OVER A EXTENDED any machine with missing or damaged guards. PERIOD, perform a complete inspection. Refer any needed service or repair to service level personnel.

  • Page 36: Troubleshooting Table

    OPERATION Troubleshooting Table PROBLEM POSSIBLE CAUSE PROBLEM POSSIBLE CAUSE Poor Spinner Speed Setting Wrong. Refer Spinner Low Electrical Power or No Electrical Assembly Power in Tow Vehicle Battery To Spreading To Operation Section in This Manual. Operate ON/OFF Switch or Hydraulic Results Conveyor Valve Block Solenoids.

  • Page 37: Service And Maintenance Cleaning And Inspection, Tire Pressure Hydraulic Fluid

    Do Not Attempt To Adjust, Inspect, (20 PSI) and cause damage to the turf. Service or Lubricate any Part of the WIDESPIN 1550 When It Is Operating. LUBRICATION The bearings on the 1550 Top Dresser are sealed and Be Aware of High Hydraulic Oil Temperatures.

  • Page 38: Conveyor Belt Care, Conveyor Belt Scraper

    Top dressing material can pass through the splice flush the hydraulic system in the WideSpin 1550 before causing a build-up of top dressing material on the inside attaching the hoses to the truck.

  • Page 39: Conveyor Belt Tension Adjustment

    MAINTENANCE AND SERVICE CONVEYOR BELT TENSION ADJUSTMENTS Initial adjustment is measured at the ends of the adjuster (See Figure 32) screws. The initial setting should be 19 mm (3/4” inch). If the belt still slips under load, tighten conveyor belt The tension on the conveyor belt must be adequate to adjusting screws equally at 1/4 turn intervals until assure that the conveyor belt moves at the same rate...

  • Page 40: Conveyor Belt Tracking Adjustment

    MAINTENANCE AND SERVICE CONVEYOR BELT TRACKING AND CENTERING for the conveyor belt to slightly move from side to ADJUSTMENTS (See Figure 33) side when the hopper is loaded. Check tracking and make small adjustments if needed. Both ends of If tracking or centering problems occur, first check the rear roller should be visible when the conveyor for unequal tension measurement on the conveyor belt is running true.

  • Page 41: Conveyor Belt Replacement

    MAINTENANCE AND SERVICE Conveyor Belt Replacement Step 8. Clean the pan and plastic pan cover. Inspect Replacement of the conveyor belt may be necessary if it is worn, has been damaged, or will no longer stay in for wear and sharp edges that may damage the new proper alignment and adjustment.

  • Page 42: Adjustment Of Spinner Vanes

    MAINTENANCE AND SERVICE Adjusting Spinner Wheel Vanes (See Figures 35 and 36) WARNING VANE ANGLE MEASURE TO AVOID SERIOUS INJURY, Always Stop the Tow Vehicle Engine and INSIDE Hydraulic System Before Making Any LOCKING Lightspread/Heavyspread Adjustments to the 100% SCREW Spinner Vanes.

  • Page 43: Removing Spinner Assembly

    MAINTENANCE AND SERVICE Removal of the Spinner Assembly (See Figure 37) The WIDESPIN 1550 can be used as a material handler Step 3. Disconnect the spinner assembly’s two quick- for top dressing material when the spinner assembly disconnect hydraulic hoses. One hose is connected is removed.

  • Page 44: Hydraulic System

    The trucks hydraulic system provides all of the hydraulic power and fluid to operate the WideSpin 1550. The PF1 Valve Body (Spinners) and S1 Solenoid: PF1 WideSpin 1550 does not have its own separate hydraulic is located in the lower section of the valve block.
  • Page 45 MAINTENANCE AND SERVICE PF2 is electrically operated valve operated by solenoid box and is variably controlled at the Run screen. When S2. Activation is by the ON/OFF switch on the display activated, the display box screen will show 0% through box and is variably controlled at the Run screen.
  • Page 46 MAINTENANCE AND SERVICE DIRECTIONAL CHECK VALVE UPPER PORT Arrow Shows Direction Of LOWER PORT Installation RIGHT SPINNER MOTOR LEFT SPINNER MOTOR SV85824-38 FIGURE 40 The solenoid coil and valve body are replaceable The check valve does not have any user serviceable service parts.
  • Page 47 MAINTENANCE AND SERVICE is sent to the left hand motor port. Flow leaves the left CONVEYOR BELT MOTOR hand motor and enters the right hand motor. Flow out The conveyor belt motor powers the conveyor belt. The of the right hand motor returns to the upper section of motor is mounted at the rear of the top dresser, on the the manifold block at port “IN”...

  • Page 48: Electrical System

    The electrical power supply cable supplies power to coding of the wire in the relay socket. the WideSpin 1550 top dressers electrical system. The jumper cable extends the cable to a the proper length. VIEW FROM REAR OF FUSE BLOCK Connection to the tow vehicle is made directly to the tow vehicle battery.
  • Page 49 MAINTENANCE AND SERVICE RECEIVER VALVE BLOCK SOLENIODS FUSE WIRING BLOCK BELT HARNESS SPINNER NOT USED TOW VEHICLE NOT USED BATTERY USED DISPLAY BOX POWER SUPPLY HARNESS AND JUMPER WIRE (PART OF MOUNTING KIT) FIGURE 41 SV85824-40 Hydraulic Valve Block Solenoid Wires The display box switch must be in the “ON”...
  • Page 50 MAINTENANCE AND SERVICE Receiver Box Wires Display Harness Connector The receiver connector is located on the left side of the The connector is located on the right side of the machine, machine, under the fender. under the fender. ● The connector is plugged into the receiver box. See ●...
  • Page 51 MAINTENANCE AND SERVICE DISPLAY BOX AND DISPLAY BOX CABLE harness. Check the fuses in the fuse block. Check all (See Figure 45) electrical connections. CAUTION The display box is factory loaded with a program that WARNING is used to communicate with the receiver box. Located TO AVOID DAMAGE TO THE ELECTRICAL SYSTEM, inside the display box is a small white triangular shaped Disconnect The Electrical Power To The Display Box...

  • Page 52: Parts Lists

    PARTS LISTS Wheels, Tongue and Lower Frame OPTIONAL FOR TRACTORS PL85824-01 85824 RevA...
  • Page 53 PARTS LISTS Wheels, Tongue and Lower Frame Item Part Description Qty. 669076 Tongue (Tow Bar) .................. 1 668679 Bar, Lower Tongue ................1 400458 Screw, Hex Head, 1/2”-20 x 4-1/2” ............4 660832 Washer, Flat, 1/2” .................. 4 444816 Nut, Hex, 1/2”-20 Nylock ............... 4 668646 Jackstand ....................
  • Page 54 PARTS LISTS Conveyor Belt and Rollers PL85820-03 85824 RevA...
  • Page 55 PARTS LISTS Conveyor Belt and Rollers Item Part Description Qty. 668039 Roller, Extruded, (1530 Idler Roller) ............1 653393 Spacer, Rear, Idler Roller................2 665429 Bearing, Pillow Block, 1.25” Bore ............4 499051 Set Screw, 1/4”-28 x 1/4” ...............8 400446 Screw, Hex Head, 1/2”-20 x 2”..............4 444816 Nut, Hex, 1/2”-20 Nylock .................4 658073...
  • Page 56 PARTS LISTS Conveyor Belt Motor, Conveyor Belt Scraper, Spinner Mount, Rear Deflector and Inspection Panel PL85820-05 85824 RevA...
  • Page 57 PARTS LISTS Conveyor Belt Motor, Conveyor Belt Scraper, Spinner Mount, Rear Deflector and Inspection Panel Item Part Description Qty. 669022 Motor Hydraulic, Conveyor Belt Drive, 1540 Series .......1 463031 Key, Woodruff, 1/4” x 1” ................2 665985 Brace, Belt Motor ..................1 400444 Screw, Hex Head, 1/2”-20 x 1-3/4”...
  • Page 58 PARTS LISTS Left Side Fenders PL85824-26 Item Part Description Qty. 669289 Fender, Right or Left Hand GREEN............2 669220 Fender Mount, GREEN ................8 499126 Nut, Clip, 1/4”-20 ..................2 499401 Rivet, Blind, 1/4” Steel ................16 661619 Screw, Hex Head, 1/4”-20 x 5/8” Whizlock ...........20 661620 Nut, Hex, 1/4”-20 Flange Whizlock ............18 668584...
  • Page 59 PARTS LISTS Right Side Fenders PL85824-27 Item Part Description Qty. 669289 Fender, Right or Left Hand GREEN............2 669220 Fender Mount, GREEN ................8 499126 Nut, Clip, 1/4”-20 ..................2 499401 Rivet, Blind, 1/4” Steel ................16 661619 Screw, Hex Head, 1/4”-20 x 5/8” Whizlock ...........20 661620 Nut, Hex, 1/4”-20 Flange Whizlock ............18 668584...
  • Page 60 PARTS LISTS Hopper Assembly and Metering Gate PL85820-08 85824 RevA...
  • Page 61 PARTS LISTS Hopper Assembly and Metering Gate Item Part Description Qty. 669043 Hopper Panel, Left Hand ................ 1 669041 Hopper Panel, Rear ................1 669040 Hopper Panel, Front ................1 669042 Hopper Panel, Right Hand ..............1 664004 Seal, Side Hopper Panel ................ 2 662204 Seal, Front Hopper Panel ...............
  • Page 62 PARTS LISTS Spinner Assembly LEFT RIGHT SPINNER SPINNER WHEEL WHEEL ARROW IN SPINNER PLATE MUST POINT IN DIRECTION OF ROTATION PL85820-05 85824 RevA...
  • Page 63 PARTS LISTS Spinner Assembly Item Part Description Qty. 665977 Spinner Frame ..................1 661526 Spinner Guide ..................1 669016 Small Hopper Assembly ................1 665785 Diverter ....................1 665790 Knob, 3/8”-16 x 2” ................... 1 665789 Spacer, Black Plastic ................1 452006 Washer, Flat, 3/8”...
  • Page 64 PARTS LISTS Spinner Hydraulic System CONVEYOR BELT MOTOR LEFT HAND MOTOR VALVE BLOCK RIGHT HAND MOTOR PRESSURE IN PRESSURE OUT LEFT RIGHT HYDRAULIC HYDRAULIC QUICK QUICK MOTOR MOTOR RELEASE RELEASE FITTING FITTING SPINNER ASSEMBLY PL85820-06 Item Part Description Qty. 669276 Motor, Hydraulic, Spinner ................
  • Page 65 PARTS LISTS Hydraulic Valve Block S1 OR S2 PF1 OR PF2 PRESSURE TO BELT MOTOR PRESSURE TO SPINNER MOTOR RETURN FROM SPINNER MOTOR RETURN TRUCK PRESSURE IN FROM RETURN FROM PL85824-17RevA TRUCK BELT MOTOR Item Part Description Qty. 668848 Manifold, Electric, 1550 Valve Block Assembly ........1 669176 Bracket, Manifold Mount .................1 400186...
  • Page 66 PARTS LISTS Hydraulic Hoses UPPER PORT LOWER PORT SEE NOTE A RIGHT SPINNER MOTOR LEFT SPINNER MOTOR DIRECTIONAL CHECK VALVE Arrow Shows Direction Of Installation DETAIL A PL85822-22 85824 RevA...
  • Page 67 QUICK RELEASE FITTINGS RELIEF CONVEYOR SPINNER VALVE BELT MANIFOLD VALVE BLOCK CHECK VALVE CONVEYOR BELT HYDRAULIC LEFT RIGHT MOTOR HYDRAULIC HYDRAULIC QUICK QUICK MOTOR MOTOR RELEASE RELEASE PL85824-29 FITTING FITTING 85824 WIDESPIN 1550 HYDRAULIC SCHEMATIC PRESSURE SPINNER ASSEMBLY 85824 RevA...
  • Page 68 PARTS LISTS Electrical System SEE NOTE B TO VALVE BLOCK SOLENIODS SEE NOTE A NOT USED TOW VEHICLE GROUND BATTERY USED PL85824-30 POWER SUPPLY HARNESS AND JUMPER WIRE (PART OF MOUNTING KIT) Item Part Description Qty. 669087 Wiring Harness, Main ................1 669223 Receiver Box, Programmed (REQUIRES REVISION LETTER TO ORDER) SEE NOTE A ..1...
  • Page 69 PARTS LISTS Display Box SEE NOTE B SEE NOTE B BACK OF SWITCH POWER WIRE JUMPER WIRE BELT WIRE SPINNER WIRE PL85824-24 Item Part Description Qty. 669142 Mounting Box, Color Display ..............1 669136 Cover, Side, Color Display Box ............... 1 669184 Screw, Machine, #10-32 x 7/16”...

  • Page 70: Decals

    PARTS LISTS Decals UNDER FENDER ON HYDRAULIC BLOCK 24 - OPERATORS MANUAL PL85824-15 85824 RevA...
  • Page 71 Decal Sheet, 85824 Electronic Control Box, Includes Items 22 & 23 ..1 Decal, Turfco Logo, 2-3/4” Inch ............. 1 Decal, Electronic Control Box Identification Label ........ 1 669320 Manual, Operator and Parts List, WideSpin 1550 85824 ......1 85824 RevA...
  • Page 72 PARTS LISTS Decals 0.71 Cubic Meter - 1088 Kg MAX. 7.7 Kg (17 lbs.) (25 Cubic Feet - 2,400 lbs) 141 Kg Max. (311 lbs) 1,552 Kg (3,421 lbs) Loaded [ I ] PRODUCT IDENTIFICATION HIGH HEAT WARNING HAND HAZARD WARNING [ I ] HYDRUALIC PRESSURE WARNING MAXIMUM ANGLE OF OPERATION...
  • Page 73 PARTS LISTS Optional Trench Filling Attachment - Product Number 86150 8 - Installation Manual and Parts List PL86150-85809 Item Part Description Qty. 661755 Mounting Bracket, Trench Filling Attachment ..........1 661756 Chute, Trench Filling Attachment.............1 658240 Bolt, Carriage, 5/16”-18 x 3/4” ..............4 446134 Washer, Lock, 5/16”...
  • Page 74 PARTS LISTS Service Date Service 1550 85824 RevA...
  • Page 75 PARTS LISTS Notes Notes 1550 85824 RevA...
  • Page 76 ® 1655 101 Avenue NE Minneapolis, Minnesota USA 55449-4420 Phone 763-785-1000 ● FAX 763-785-0556 Internet - www.turfco.com ● E-mail - service@turfco.com Manual Number 669320 RevA WideSpin Top Dresser Printed in USA Tow Behind - No Engine 0214 Product Number 85824...

Table of Contents

Save PDF