Table of Contents
Advertisement
Item
LED indication
4
Tracking completed, AP connection incomplete
5
Wi-Fi modem malfunctioning
6
Searching AP (AP mode)
7
Tracking units
8
No unit tracked
9
Inspection of the network PBA required
10
User authentication required (AP mode)
11
Downloading
12
Rescue mode
13
* If the "Rescue mode" indication appears on the LED:
- Reset the Wi-Fi Kit using the "Reset" button, and check if "Rescue mode" turns off.
- If "Rescue mode" persists even though you tried resetting the Wi-Fi kit several times, contact a service
center.
LED display during tracking
* If communication is normal but there are only the indoor units with the central control disabled.
- Reset the central control option on the indoor units. When the central control is disabled, the indoor units
cannot be controlled with the Wi-Fi kit.
Power LED
Wi-Fi connection LED
Blinking
Off
On
Blinking
* If no indoor unit is tracked
- Check whether the communication cables between indoor units and the Wi-Fi Kit are connected properly.
Power LED
Wi-Fi connection LED
Blinking
Blinking
Blinking
Initializing the user data
• To initialize the user data on a Wi-Fi Kit, press the (SW3) button inside the Wi-Fi Kit for 5 seconds. All the
indicators illuminate and the user data is deleted.
Wi-Fi Off
Wi-Fi setting LED
Blinking
On (Green)
On (Yellow)
Blinking
Wi-Fi setting LED
Blinking
Off
Blinking
Power supply
Wi-Fi connection
On
Blinking
On
Blinking
Blinking
On
On
Off
Blinking
Off
Time
Off
About 10 seconds
Off
Alternating every 10
seconds
Off
Off
About 10 seconds
Time
Off
About 10 seconds
Off
About 10 seconds
Off
About 10 seconds
Wi-Fi setting
Off
Off
Blinking
Blinking
Off
On
Blinking
Off
Off
Off
Blinking
Blinking
Off
Blinking
On
Off
On
Blinking
Blinking
Off
Status
Tracking
Only the units with the
central control disabled
Tracking
Status
Tracking
No unit tracked. Need to
check communication
Tracking
15
Advertisement
Table of Contents
