Table of Contents
Advertisement
Interface Element
Depth Drop-Down List
Speed Drop-Down List
Decimal Field
When you change the display units on this dialog box, the following items are also changed on
the main screen: primary depth, secondary depth, speed, well schematic, depth track, and true
vertical depth.
Figure 5-4: Settings Dialog Box, Alarms Tab
Interface Element
Over Speed Field and
Drop-Down List
Enable Speed Alarm
Check box
Enable Depth Alarm
Check box
Depth Field and Drop-
Down List
Property of DataCan Services Corp. No duplication or distribution without written consent
Property of DataCan Services Corp. No duplication or distribution without written consent
Description
Sets the units of display for depth (in m or ft).
Sets the display units for speed (in m/min, ft/hr, ft/min).
Sets how many decimal places appear on the odometer. Default
value is 1.
Description
Enter the speed at which the speed alarm will be activated. The
speed alarm displays a message when the current speed exceeds
this value. Ensure the units are correct (m/min, ft/min, or ft/hr).
Select this check box to enable the speed alarm. There must be a
speed value in the Over Speed field before the alarm will activate.
Select this check box to enable the depth alarm. There must be at
least one depth value in the depth list before the alarm will activate.
Enter a depth value at which you want to activate the depth alarm.
You can enter more than one depth value. An alarm will sound when
the primary depth reaches any of the alarms listed in the depth value
list.
78
Advertisement
Table of Contents
