8. In the Major Div. field, enter the total number of major divisions that you want to appear
on the gauge.
NOTE: The major divisions are indicated by the large marks around the perimeter
of the gauge. The default value is 10.
9. In the Medium Div. field, enter the number of medium divisions that you want to appear
on the gauge for every major division on the gauge.
NOTE: The medium divisions are indicated by the medium-sized marks around the
perimeter of the gauge. The default value is 2.
10. In the Minor Div field, enter the number of minor divisions that you want to appear on
the gauge for every medium division on the gauge.
NOTE: The minor divisions are indicated by the small marks around the perimeter
of the gauge. The default value is 5.
11. In the Number div box, enter how many number values you want to appear on the
gauge.
NOTE: The default value is 10. Normally this value will be the same as the Major
Div setting.
12. Click the OK button to accept the definition.
Property of DataCan Services Corp. No duplication or distribution without written consent
Property of DataCan Services Corp. No duplication or distribution without written consent
Property of DataCan Services Corp. No duplication or distribution without written consent
45