Advertisement
KR-V126R
CONTROLS AND INDICATORS
@® SURROUND
MODE
switch
Select the desired surround mode with this switch when
the SURROUND
ON/OFF
switch is set to ON. Each time
this switch
is pressed,
DOLBY,
THEATER
or STADIUM
surround
mode
is selected in turn cyclical.
This
becomes
the
recall
function
when
the
surround
function is not displayed. When this key is pressed with the
surround function displayed, the mode
is changed.
@ SURROUND
ON/OFF switch
@® REAR VOLUME
controls
@ THROUGH
DUBBING
[2]>
[1] key
This activate the through dubbing from VIDEO 2 to VIDEO
1.
@ THROUGH
DUBBING
[3]>
[1] key
@® Input selector switches
TUNER
- Selects the tuner mode.
@® AUDIO
INJECTION
switch
@
CATV
ON/OFF
switch
Press this switch to select FM 750 or CATV 7529 antenna
line.
@ CARTRIDGE selector switch
This switch is used to select the type of cartridge of the
turntable connected.
MM
—- When using an MM (moving magnet) and an high
output MC (moving coil) cartridge. set the switch to this
position.
MC
- When using an MC cartridge set the switch to this
position.
@ REMOTE
POWER
STAND
BY indicator
This indicator lights so far as the power cord is plugged
into the AC outlet. It is lit to show that the POWER switch
on the front panel or the POWER key on the remote contro!
unit can be activated.
@ REMOTE
SENSOR
Point the supplied remote control unit towards this sensor
and operate.
It blinks when
the signal from the remote
control unit is received.
@ MUTING
key
When the muting key is pressed, the MUTING indicator in
the display window
will flash, and the overall
listening
sound level is reduced.
When the key is pressed again, you can restore exactly the
same listening level as before.
@® BALANCE controls
@ VOLUME
controls
Note:
A slight noise is heard from the speakers when
ope¢ating the
VOLUME controls. This noise is the built-in microprocesior control
signal and is not a fault.
@ Preset (numeric) keys
Use these keys to:
@ DIRECT key
Used to tune to the station directly.
Input the desired
frequency numerics with the numeric keys afterp ressing
the DIRECT key.
Advertisement
