Advertisement
10.
11.
DISASSEMBLY FOR REPAIR
Disengage the 6 claws retaining the Display Unit (X14-
2130-10) (C/6) to the panel escutcheon ( @ ).
Remove the 3 screws retaining the Display Unit (X14-)
(A/6) to the panel escutcheon ( @ ).
Disengage the 4 claws retaining the Display Unit (X14-)
(A/6) to the panel escutcheon ( @ ).
Disconnect the connector (CN1-A,B) which have been
connected to the Display Unit (X14-) (A/6) and (X14-)
(8/6) (@).
Place the Display Unit (X14-) (A/6) in the direction
of the arrow ( @).
Remove the 4 screws retaining the Display Unit (X14-)
(B/6) to the panel escutcheon ( @ ).
Disengage the 8 claws retaining the Display Unit (X14-)
(B/G) to the panel escutcheon. To facilitate this proce-
dure, disengare the claws from right ( ®)
to left
(®).
Remove the Display Unit (X14-) (B/6) in the direction
of the arrow ( Q ).
KR-V126R
Advertisement
