Table of Contents
Advertisement
SUN2000-125KTL-JPH0
User Manual
7.1.5.1 Setting Grid Parameters
Procedure
Step 1 Choose Function Menu > Settings > Grid Parameters to access the parameters
setting screen.
Figure 7-10 Power grid parameters (special user)
----End
Parameters
No.
Parameter
1
Grid Code
2
Isolation settings
3
Output mode
4
Automatically start upon
grid recovery
5
Grid connected recovery
time from grid faults (s)
Issue 15 (2024-01-30)
Description
Set this parameter based on the grid code of the country
or region where the inverter is used and the inverter
application scenario.
Set the working mode of the inverter based on the
grounding status at DC side and the connection to the
power grid.
Specifies whether the inverter output has a neutral wire
based on the application scenario.
Specifies whether to allow the inverter to automatically
start after the power grid recovers.
Specifies the time after which the inverter begins
restarting after the power grid recovers.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
77
Advertisement
Table of Contents
