SUN2000-125KTL-JPH0
User Manual
Figure 8-5 Tightening screws
----End
8.5 Replacing a Fan
● Before replacing a fan, power off the inverter.
● When replacing a fan, use insulation tools and wear personal protective
Step 1 Remove the screw on the fan tray and save it. Pull out the fan tray until the fan
baffle plate aligns with the inverter chassis.
Figure 8-6 Pulling out fan tray (1)
Step 2 Remove the cable ties shared by the cables, unscrew the connectors, and
disconnect the cables.
Issue 15 (2024-01-30)
CA UTION
devices.
NO TE
If the fan tray gets stuck when being pulled or pushed, slightly lift it.
Copyright © Huawei Technologies Co., Ltd.
8 Maintenance
96