Table of Contents
Advertisement
2. General safety instructions
The machine can only be used by persons who are familiar with its functions, dangers and
instructions for use.
The operator must provide appropriate instructions for personnel.
Persons under the influence of alcohol, drugs or medicine, which affect the mental fitness
must never operate or maintain the machine.
The machine must never be used by children or by persons with limited physical, cognitive
or mental abilities, unless they have been given supervision or instruction by a person
responsible for their safety.
The machine can only be operated in technically flawless condition.
Before turning on the machine, always make sure it is positioned on a stable ground.
Minimum age of the operator: 18 years.
The machine can only be operated by ONE person at a time.
To maintain your concentration, make several pauses during work.
Keep the work area well lit, poor lighting may significantly increase the risk of injuries!
Never work without personal protective equipment.
Before any repairs, installations, maintenance and cleaning, always make sure the drive is
turned off and wait until the machine stops moving.
Never leave the machine running unattended.
Always turn off the machine before changing position.
Only use original spare parts UNIFOREST.
Never modify or interfere in any way with the machine.
Only qualified personnel are authorized to work on electrical equipment!
Never used damaged connections.
Keep electrically powered machines protected from rain. Otherwise this may result in
failure of the switch or electric motor.
Never use your hands to hold timber when cutting.
Never try to remove wood chips or other parts of workpieces from the cutting area when
the machine is running!
With gloves on, never reach around the saw blade when it is rotating!
The machine can only be used outdoors!
If you decide to use the machine indoors, always provide local suction (intake at the
source!
The machine must be kept in a good working condition and free from residue, e.g. splinters
and pieces of wood!
During work, always wear protective gloves and tight-fitted clothing.
During work, always use eye or face protection!
To reduce the risk of inhaling harmful dust, always use a mask for respiratory protection.
Only use saw blades designed for noise level reduction!
Never use damaged or deformed saw blades!
Minimum diameter of saw blade
990 mm
Only use saw blades which comply with the standard EN 847-1.
After the machine is turned off, make sure that all the tools stopped working!
The operating pressure in the hydraulic device must never exceed 220 bar!
Maximum diameter of saw blade
1010 mm
7
Bore
40 mm
Advertisement
Table of Contents
