Replacing The V-Belt Of A Cardan-Shaft Drive And Electric Motor - Uniforest TITAN 40/20 User Manual

2. Replacing the V-belt of a cardan-shaft drive and electric motor

Remove the cover and the cardan shaft protection.
 Loosen six head screws (2) on the protective plate (1) and remove it.
Loosen the safety hexagon nut (5) on the tensioning screw.

 Loosen the tensioning screw (4).
 Remove old V-belts (6).
 Insert new V-belts.
 Adjust the tension of V-belts with the tensioning screw (4).
 Fasten the safety nut on the tensioning screw (5).
 Mount the protective plate and fasten it with six screws.
When replacing V-belts, the protective plate of the electric motor and the electric motor must
also be removed.
All protective devices must be in place before the machine is operated.
29