Conveyor Belt - Uniforest TITAN 40/20 User Manual

7. Conveyor belt

 Conveying position
 When the conveyor belt is in operating position, you only need to activate the conveyor
drive lever, which remains in position when activated.
 If the conveyor belt is jammed, it can be rolled backwards with the same lever, which must
be pushed downwards; in this case the lever will not remain in its position.
Operating position:
Adjustment of the angle of the conveyor mechanism:
The maximum angle of the conveyor mechanism is 45°, if exceeded; the conveyor mechanism may be
irreparably damaged during firewood splitting!
Conveying position:
 Follow the procedure above in reverse order.
Firewood length
25 cm
33 cm
40 cm
50 cm
60 cm
Inclination angle
4m belt
to 45°
to 30°
Inclination angle
5m belt
to 45°
to 30°
20
Inclination angle
to 45°
to 42°
to 40°
to 35°
to 30°
Belt height A
3000 mm
2150 mm
Belt height A
3600 mm
2600 mm