Table of Contents
Advertisement
GEN 5
You will have to specify the following settings:
"Key length" (for WEP networks only)
-
the authentication key can be 10 characters long (64bit) or 26 characters long
(128bit).
"Key" (WEP or WPA)
-
type in the authentication key.
-
you will be taken to a virtual keyboard (see: Using the Virtual Keyboard ).
-
type in the key and tap on "
"Authentication" (for WEP networks only)
-
the network's authentication method can be based on an "
fault)
" or a "
Shared Key
"Configuration"
-
Automatic (DHCP)
it can be "
-
Automatic (DHCP)
if it is "
Simply use the "
provided the signal is strong enough.
-
if you must configure the network manually, select the "
parameters will appear: the required information can be obtained from the person
who manages the network.
When you have finished entering all the information, use the "
your ARCHOS will connect to this network, provided the signal is strong enough.
Filtered networks: If your network manager allows only specific devices to
connect to the network (known as MAC address filtering), you can supply the
network manager with the MAC address of your ARCHOS. To find out what
your MAC address is, select the "Settings" menu item from the Home screen,
then choose "System". See: "System" Settings.
MANUAL
V2.0
OK
" when you have finished.
".
" or "
", then you do not have to enter any more information.
Connect
" button, and your ARCHOS will connect to this network,
CoNNECTING To A WIfI NETWoRk > P. 45
Manual
".
Open System (de-
Manual
" setting. Other
Connect
" button, and
Advertisement
Table of Contents
