Table of Contents
Advertisement
GEN 5
5.
COnneCTIng TO a wIfI neTwOrk
605
Your ARCHOS can connect to a variety of wireless networks. You will find
below the procedure to connect to these different WiFi networks.
5.1 wIfI COnneCTIOn PrOCedure
ENAbLING WIfI
From the Home screen, select the "
for available WiFi networks.
•
The first time you use your device, you may get a message "
work found
". Select "
will be displayed.
•
If you get the message "
available networks
Once you are connected to a WiFi network, the status bar icon
nected) will become
is not enabled.
When you enter an application that uses the WiFi (Web Browser, ARCHOS
Content Portal, etc. See: The WiFi Features), your ARCHOS will try to connect
to the WiFi. If a configured network is detected, the ARCHOS will automatically
connect to it and then launch the application.
THE LIST of AVAILAbLE NETWoRkS
•
The list of available networks shows
all the wireless networks in range of
your device.
•
The list is constantly refreshed au-
tomatically.
•
In the list of available networks, for
each network you will see the fol-
lowing information:
MANUAL
V2.0
Enable WiFi
View available networks
Could not connect to any WiFi network!
", and the list of available networks will be displayed.
(WiFi connected). There is no status bar icon at all when WiFi
CoNNECTING To A WIfI NETWoRk > P. 42
" menu item
. Your device will scan
No configured net-
", and the list of available networks
View
", select "
(WiFi not con-
Advertisement
Table of Contents
