Table of Contents
Advertisement
REMOTE CONTROL FUNCTIONS
NOTE: You will hear a beep once every time a remote-control button is
pressed, signaling that the command has been received. Locate the four
function buttons on the remote control:
1. On/Off Button: This button turns the appliance on or off. When this
button is depressed, and the system is off, the pilot will ignite. After
pilot ignition, the pilot will light the main burners. Refer to IPI and CPI
Modes in this manual for pilot ignition.
2. Thermostat Button: This button will allow the selection of three modes:
Manual, Normal Thermostat, and Smart Thermostat. NOTE: The
appliance will automatically shut off after 12 hours of continuous use.
a. Manual (Off): In this mode, the appliance can be turned on,
regardless of the room temperature. The actual room temperature
has no effect in this mode. All other functions such as fan speed
control, flame height control, and accent light intensity controls
are manually controllable.
b. Normal Thermostat (On): Will turn itself on and off, depending
on the temperature you set. When you set the thermostat, it will
continue heating until the room temperature increases 1°F above
the set thermostat temperature. To increase the thermostat
temperature, press the up button until the desired temperature is
displayed in the thermostat temperature window. The fan will turn
on 5 minutes after startup and will turn off 12 -1/2 minutes after the
flames turn off. The flame height can be adjusted while in use, fan speed can be adjusted after 5 minutes
of startup. The accent light can be adjusted any time after startup.
c. Smart Thermostat (Smart): In this mode, room temperature is maintained, and flame height adjusts
automatically to provide continual, efficient heat. All other functions of the normal thermostat mode,
except the flame height adjustment, are allowed. Manual flame height adjustment is not allowed in this
mode. The Smart Thermostat function adjusts the flame height in accordance to the difference between
the set point temperature and the actual room temperature. As the room temperature gets closer to the
set point temperature, the Smart Thermostat automatically modulates the flame down.
3. Up/Down Button: This button is used to increase or decrease the thermostat temperature, flame height, fan
speed, and accent light intensity.
4. Mode Selection Button: This button is used to toggle between the various function icons: flame height, fan
speed, accent light, and rear burner (certain models).
AUTOMATIC SAFETY RESTART
This system will execute an automatic turn off command within (24) hours of a continued pilot flame ignition. This
allows the system to verify correct safety functions. After the turn off sequence is completed, the ignition module
will re-execute the latest command.
TURN ON FUNCTION
5. Press the on/off button. The remote-control display will show all active icons on the screen.
6. Select the thermostat mode by pressing the thermostat button: OFF (meaning Manual), ON (meaning Normal
Thermostat) or Smart (meaning Smart Thermostat).
a. If the thermostat icon displays as "OFF" (Manual), it will ignite and start on Hi.
b. If the thermostat icon displays as "ON" (Normal Thermostat), it will only ignite if the thermostat temperature
is greater than the room temperature.
c. If the thermostat icon displays as "SMART" (Smart Thermostat), it will only ignite if the thermostat temperature
is greater than the room temperature.
TURN OFF FUNCTION
Press the on/off button.
-33-
LCD Display
On/Off Button
Thermostat
Button
Up/Down
Arrow Button
Mode Button
OFF
ON
SMART
MANUAL
NORMAL
MODE
THERMOSTAT
SMART
MODE
Advertisement
Table of Contents
