Advertisement
Speakercords
At_rst0thespeake_'cords.
.
Twistthevinyltipandpulloff.
_])
X
_
_
-Connectthecordstotheterminalsofsamecolorsothenum-
bersonthestickersmatchthenumbersundertheterminals.
oNever short-circuit
positive (+) and negative (-) speaker wires.
oBe sure to connect only positive (red or gray) wires to positive
(+) terminals and negative (black or gray with blue stripe) wires
to negative (-) terminals.
Incorrect connection can damage the speakers.
• After you have completed
setup and connection,
wind the ex-
Black
cess cord and keep together with string.
• The speaker nets cannot be removed.
Notes
on speaker
use
• You can damage your speakers and shorten their useful life if
you play sound at high levels over extended periods.
Front speaker (left)
Front speaker (right)
Surround speaker (left)
O Red
O Black
Surround speaker (right)
Center speaker
Subwoofer
Attaching
to a wall
Front and surround speakers can be attached to a wall.
Attach four speaker feet to each speaker, ensuring they do not
cover the holes.
Set the speaker onto screws and slide through bracket to lock
into position.
I,III_H
Speaker feet (included)
Screw (not included)
30-3,5 mm
-
-/////A
7. 9 mm,,
V
/ 106
m m (41½4")
_"_
_';
_(i-nP_d)",/Lo_
Screw (not included)
The method for attaching speakers to a wall is the same except
that there is only one bracket.
Attaching
to speaker
stands
Ensure the following conditions are met when you purchase your
speaker stands.
• Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
oThe stands
must be able to support over 10 kg (22 lb.) for
SB-AFC286 and 5 kg (11 lb.) for SB-AFC95.
• The stands must be stable even if the speakers are in a high
position.
5 mm (1_A4"),
pitch 0.8 mm
mm
(223_4 '')
Attach the stands
Plate thickness
r_
with these ho,es,
p,us 7K!0 mmI
(plus %2" to 2%4") I_
/
Speaker stand
L
(not included)
The wall or pillar on which the speakers are to be attached should
be capable of supporting 10 kg (22 lb.) for SB-AFC286
and 5 kg
(11 lb.) for SB-AFC95
per screw.
Advertisement
